OpenFOAM advanced training - Online. July-August, 2020 (https://bit.ly/2CcYQ11)
 

While we all adjust to the new normal of the COVID19 pandemic and due to the travel restrictions imposed by many countries, we have decided to cancel all the classroom training sessions programmed during the year. All the training sessions will be delivered online.

• The training sessions will be delivered starting from mid-July until the beginning of August.

• The course is delivered live. However, all sessions will be recorded.

• To maximize users participation in different time-zones, the courses will start at 2:00 pm CET and will end at 5:30 pm CET.

• Each training session will be split into two non-consecutive days.

• Attendees are required to bring their computer with OpenFOAM pre-installed. We will prepare a video to help the participants to install OpenFOAM and any additional application that will be used during the training.

• The inscription fee includes the training material (in pdf format), and access to all supporting material (tutorials and videos).

• Also, many of you or your colleagues may have been forced to be off work during this challenging period; therefore, we have decided to adjust our training fees and offer a 20% discount in all advanced training sessions.

With this in mind, we want to draw your attention to the upcoming OpenFOAM advanced online training sessions that will take place in July-August, 2020. During these online training sessions, we will address the following topics:

• JUL15-17 2020. Turbulence modeling in general CFD and OpenFOAM® - Theory and applications.

• JUL20-22 2020. Multi-phase flows modeling in general CFD and OpenFOAM® - Theory and applications.

• JUL24-27 2020. Introduction to the FVM method. Standard practices in general CFD with applications to OpenFOAM.

• JUL29-31 2020. Introduction to solid modeling for general CFD and meshing using OpenFOAM® technology - Onshape and snappyHexMesh.

• AUG3-5 2020. Design of experiments, space exploration, knowledge extraction, and numerical optimization using Dakota - Code coupling Dakota-OpenFOAM.

• AUG7-10 2020. Moving meshes, rigid body motion, adaptive mesh refinement, and overset meshes.

So hurry up and book your place, you are still on time to take advantage of our reduced fees.

For more information or to book your seat visit the following link,

• https://bit.ly/2CcYQ11

Prerequisites: intermediate knowledge of CFD, OpenFOAM, and Linux is required. Some basic knowledge of C++ and shell scripting is beneficial. For those following the optimization training, no prior knowledge of Dakota is required.

Location: online.


Time-zone: Central European Time (CET).

Course times: to maximize users participation in different time-zones, the courses will start at 2:00 pm CET and will end at 5:30 pm CET. Each training session will be split into two non-consecutive days.


Language: English

Number of seats: 7 places available.

Training material: every participant will have access to the lecture notes (in pdf format), and to all supporting material (tutorials and videos).

Teaching method: lectures and hands-on sessions to validate the acquired knowledge. A training certificate is provided to all attendees who complete the course.


Additional information:

• Cancellations will not be accepted.

• Attendees are required to have all applications installed.

• To maximize the learning process, it is recommended to use two devices. One device to run all tutorials and the other device to follow the online meeting.

• To deliver the training, we will use Cisco WebEx, GoToMeeting, or Zoom online conferencing applications, that are free on the client side.

• For remote control, we will use anydesk, which is free on the client side.

• A training certificate is provided to all attendees who complete the course.

• Support to install the required applications can be provided at a nominal price. Send us an email for more information.