[henrik]

The OpenFOAM regulars' table (Stammtisch) is an informal meeting of OpenFOAM users and CFD enthusiasts. It is intended to provide a platform for networking and exchange and will be organised this year in Göttingen at NHR-Nord@Göttingen.

The meeting will take place on 1 and 2 April 2025. On the first day, an informal dinner is planned to get to know each other (self-paying). The second day is the main day of the Stammtisch and will feature many exciting presentations, a guided tour of the GWDG HPC cluster and two special sessions: ‘Bring your problem’ and ‘Find your employer’ (see description below). The provisional programme can be found in the following agenda.

Participation is free of charge on both days, but registration is required as seating is limited. You can also submit your contributions via the registration page. These can be presentations, potential employers and issues to be discussed. For further questions and to register, please contact our organisation team.

Further information and registration details can be found on link.


Best Regards,
Henrik, Patrick and Sergey

[henrik]

Dear FOAMers,

the tentative agenda is ready and we are looking forward to an exiting event

• 08:30 Willkommen+Kaffee
• 09:00 Begrüßung
• 09:10 H. Rusche (Wikki GmbH): Inno4Scale Scale-Track / AMCG
• 09:35 M. Koch (U Göttingen): Single cavitation bubbles and 1001 / pre- and post-processing scripts
• 10:00 H. Ibrahim (TU Clausthal): Efficient parallel techniques for interface-resolved particle transport
• 10:25 Kaffeepause
• 10:50 R. Aragal (Baker Hughes): Implementierung von nicht-Newtonschen Modellen für Wärmeübertragungs-Solver
• 11:15 Problem 1: Convergence of pseudo-transient solutions of annular flow in drilling application (A. Starostin, Baker Hughes)
• 11:40 P. Höhn (GWDG): NHR Services for OpenFOAM users
• 12:05 Mittagspause
• 13:05 Find your employer / GWDG Führung / Kleingruppenarbeit
• 13:50 M. Müller (U Wuppertal): Numerische Modellierung der hydraulischen Leistungsfähigkeit von Straßeneinläufe
• 14:15 Problem 2: Analyse der hydraulischen Leistungsfähigkeit von Drosselorganen (M. Müller, U Wuppertal)
• 14:40 Problem 3: Modeling filtration phenomenon (J. Dave, Herding GmbH)
• 15:05 Kaffeepause
• 15:30 H.-M. Schlesier (DLR): Compressible low-Mach impingement setup for heat transfer
• 15:55 Q. Wang (TU Clausthal): Liquid Films in OpenFOAM
• 16:20 Dein Vortrag / Dein Problem
• 16:45 Planung der nächsten Veranstaltungen und Schlusswort
• 17:00 Ende der Veranstaltung