CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   ParaView (https://www.cfd-online.com/Forums/paraview/)
-   -   [OpenFOAM] FSI in Paraview (https://www.cfd-online.com/Forums/paraview/138870-fsi-paraview.html)

hassan1201 July 12, 2014 20:36

FSI in Paraview
 
I have two files fluid +Solid (icoFsiElasticNonLinULSolidFoam)
paraFoam Views fluid only.
What I can do to show fluid +solid:confused::confused::confused:????????

magz April 20, 2017 23:53

openfoam-extend-3.1&fsiFoam&axialTurbine
 
2 Attachment(s)
It's a good day!
Recently I run a FSI tutorial on openfoam-extend-3.1, called axialTurbine, but when post-processing, I don't know how to display solid's displacement D and displacement increment DD in paraview, who can help me? thank you so much.
And I find that All post-processings of fsiFoam tutorials, I can't solve the problem that load solid's fields only load fluid's.

magz April 24, 2017 04:34

Quote:

Originally Posted by hassan1201 (Post 501300)
I have two files fluid +Solid (icoFsiElasticNonLinULSolidFoam)
paraFoam Views fluid only.
What I can do to show fluid +solid:confused::confused::confused:????????

I miss the same problem, have you solved that? thank u

wyldckat April 25, 2017 13:43

Greetings to all!

Instructions for seeing multiple regions in ParaView are given on this wiki page: https://openfoamwiki.net/index.php/H...rocMultiregion - I revised this page in January of this year, so it is a bit more up to date.

@magz: I've moved your older post on this topic to this thread as well, since it's in the same topic.

Best regards,
Bruno

magz April 25, 2017 22:21

Quote:

Originally Posted by wyldckat (Post 646549)
Greetings to all!

Instructions for seeing multiple regions in ParaView are given on this wiki page: https://openfoamwiki.net/index.php/H...rocMultiregion - I revised this page in January of this year, so it is a bit more up to date.

@magz: I've moved your older post on this topic to this thread as well, since it's in the same topic.

Best regards,
Bruno

It helps me a lot, thank you so much!

dewey June 14, 2017 13:20

i run this tutorial, but i dont know how to visualize with paraview, do you know how to view the results? i tried paraFoam, and paraFoam -builtin...

[Moderator note: the question above was moved from https://www.cfd-online.com/Forums/op...-wont-run.html]

hello, could you explain me how to visualize the result of this tutorials?

sheaker June 14, 2017 15:53

Quote:

Originally Posted by dewey (Post 653206)
i run this tutorial, but i dont know how to visualize with paraview, do you know how to view the results? i tried paraFoam, and paraFoam -builtin...

Try:
run in console foamToVTK
open paraView from shortcut
open in paraView VTK file.

popa March 19, 2019 08:42

Hello,do you know how to monitor the stress on the solid?I want to see the stress of one poin on the solid,and monitor it all the time.
Thank you.

Quote:

Originally Posted by hassan1201 (Post 501300)
I have two files fluid +Solid (icoFsiElasticNonLinULSolidFoam)
paraFoam Views fluid only.
What I can do to show fluid +solid:confused::confused::confused:????????


I express my problem in the end ,can you leave your email?


All times are GMT -4. The time now is 10:37.