|
[Sponsors] |
[OpenFOAM] Display cells filtered by velocity magnitude |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
July 10, 2015, 08:14 |
Display cells filtered by velocity magnitude
|
#1 |
Senior Member
Join Date: Mar 2015
Posts: 250
Rep Power: 12 |
Hello foamers,
strangely, I get some very high velocity magnitudes in ParaView. I know this because after loading all my mesh regions, setting color by U in the display panel and rescaling to data range, the top of my color legend displays very high values. But I can't find these cells in ParaView (nothing is red). In order to find out where the problematic cells are, I checked Auto Convert Properties in Paraview -> Preferences and after that I applied the threshold filter and selected U_Magnitude. But no matter what I enter in the Lower Threshold and Upper Threshold field, I can't see anything in the output window. Has anyone experinced something similar? Best regards, Kate |
|
Tags |
threshold filter, u_magnitude |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] snappyHexMesh sticking point | natty_king | OpenFOAM Meshing & Mesh Conversion | 11 | February 20, 2024 09:12 |
[ICEM] Error in mesh writing | helios | ANSYS Meshing & Geometry | 21 | August 19, 2021 14:18 |
cellZone not taking all the cells inside | rahulksoni | OpenFOAM Running, Solving & CFD | 6 | January 25, 2019 00:11 |
serial udf to parallel udf | radioss | Fluent UDF and Scheme Programming | 10 | January 19, 2019 08:56 |
Terrible Mistake In Fluid Dynamics History | Abhi | Main CFD Forum | 12 | July 8, 2002 09:11 |