CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Paraview & paraFoam

how to export the whole mesh as a 3D model

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 8, 2017, 07:50
Default how to export the whole mesh as a 3D model
  #1
New Member
 
zhuyuehan
Join Date: Feb 2017
Posts: 2
Rep Power: 0
john zhu is on a distinguished road
I tried foamToVTK and foamToVTK -poly(wiki said it can export the mesh without decomposing cells)
but this way only export the VTK model which every block and toposet has been divided to different file.

And I tried export to x3d too,but I can't open the x3d file in windows with Glyph Filter.(I used vmrl to open it showed all black)

my openFoam version is 3.0.x OpenFOAM-in-Box-16.10
paraview 5.0.1
system ubuntu 16.04 in VMware
solver chtMultiRegionSimpleFoam

my final purpose is to make a heating animation. It need to show data from any angle in realtime so I can't use screenshot.


anybody have some suggestions?
thanks! (<ゝω)☆~
john zhu is offline   Reply With Quote

Reply

Tags
foamtovtk vtk x3d model

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
No layers in a small gap bobburnquist OpenFOAM Native Meshers: snappyHexMesh and Others 6 August 26, 2015 09:38
[ICEM] Rotating Mesh and export Mesh ahmadreza ANSYS Meshing & Geometry 10 July 12, 2015 04:17
how to set periodic boundary conditions Ganesh FLUENT 13 January 22, 2014 05:11
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 12:55
Icemcfd 11: Loss of mesh from surface mesh option? Joe CFX 2 March 26, 2007 18:10


All times are GMT -4. The time now is 14:48.