Dear OF users,
My problem i
Dear OF users,
My problem is always unsolved !!!!!!!!! ERROR: In /shared/OpenFOAM/ThirdParty/ParaView3.3-cvs/VTK/Rendering/vtkXOpenGLRenderWindow .cxx, line 398 vtkXOpenGLRenderWindow (0x13476b0): Could not find a decent visual ERROR: In /shared/OpenFOAM/ThirdParty/ParaView3.3-cvs/VTK/Rendering/vtkXOpenGLRenderWindow .cxx, line 398 vtkXOpenGLRenderWindow (0x13476b0): Could not find a decent visual X Error: BadValue (integer parameter out of range for operation) 2 Extension: 144 (Uknown extension) Minor opcode: 3 (Unknown request) Resource id: 0x21 ERROR: In /shared/OpenFOAM/ThirdParty/ParaView3.3-cvs/VTK/Rendering/vtkXOpenGLRenderWindow .cxx, line 623 vtkXOpenGLRenderWindow (0x13476b0): Cannot create GLX context. Aborting. Nobody has had the same error message in the past ? Thanks for helping me. Regards, Stephane |
Hi,
try to download the bin
Hi,
try to download the binaries for your system directly from kitware. So you are sure that your problems have nothing to do with wrong compilation and/or version. When i did it, i was sure that my grafic card was the reason! http://www.paraview.org/paraview/res.../software.html Achim |
I have same problem
Hello,
I have same problem sega@sega:~/OpenFOAM/sega-1.5/run/tutorials/icoFoam/cavity> paraFoam ERROR: In /home/sega/OpenFOAM/ThirdParty/ParaView3.3-cvs/VTK/Rendering/vtkXOpenGLRenderWindow.cxx, line 398 vtkXOpenGLRenderWindow (0x132c320): Could not find a decent visual ERROR: In /home/sega/OpenFOAM/ThirdParty/ParaView3.3-cvs/VTK/Rendering/vtkXOpenGLRenderWindow.cxx, line 398 vtkXOpenGLRenderWindow (0x132c320): Could not find a decent visual X Error: BadValue (integer parameter out of range for operation) 2 Extension: 144 (Uknown extension) Minor opcode: 3 (Unknown request) Resource id: 0x21 ERROR: In /home/sega/OpenFOAM/ThirdParty/ParaView3.3-cvs/VTK/Rendering/vtkXOpenGLRenderWindow.cxx, line 623 vtkXOpenGLRenderWindow (0x132c320): Cannot create GLX context. Aborting. I use openSUSE 11.1, grafic card nVidia 6800 ultra or nVidia NVS 140M, nVidia drivers. |
Hi Sergei,
you have the same problem as mine which is unfortunately still unsolved ! I also use openSUSE 11.1, graphic card nVidia and nVidia driver. Keep me updated if you find how to solve this problem. Regards, Stephane. |
Hi!
I have the same problem. Curiously paravfoam/paraview works after an fresh opensuse installation without updating the nvidia driver. So the only thing I can tell you is: remove the nvidia driver. If you do that you loose the driver features (3d aceleratuion, etc) but you can work... It is a poor solution but it is the only way i can work My system is a laptop with: OpenSuse 11.1 OpenFoam 1.5 Qt 4.3.5 NVidia GeForce 9200M GS My question here is: this only happens with openSuse or also with other linuxes? Because if it only happens with OpenSuse i will try to change to ubuntu. If happens with any OS it its a problem of graphic board software. |
I have a solution
Hello!
I have a solution to the problem. I have installed the ParaView 3.4 from source and Native OpenFOAM Reader for ParaView from here. This works very well on OpenSUSE 11.1 with OpenFOAM 1.5, NVidia Quadro NVS 140M, QT 4.4.3 and NVidia drivers. |
Hi,
I have installed OpenFOAM-1.6 under Linux 11.1. My problem with paraFoam has disappeared. Now paraFoam (paraview 3.6.1) runs well. Regards, Stephane. |
Alternative solution
This is a problem with the glx module, not with paraview.
Try running glxgears and glxinfo. That will test whether the glx module is working correctly. One suggestion is to try running them as root - in my case, a permissions error was preventing various libraries from loading. Everything worked fine as root, though. Incidentally, I experienced the problem using OpenSUSE 11.1, an NVIDIA QuadroFX1700 in a Dell T7400 workstation, with current drivers from the NVIDIA repository. As it was a permissions error, I did not need to edit xorg.conf at all. ** Edit ** I had already gone through installing paraview from source, with the appropriate version of Qt - it might be worth checking this permissions issue first. |
GLX and paraview
I had been receiving the error:
vtkXOpenGLRenderWindow (0x13476b0): Cannot create GLX context. Aborting. when starting parafoam and resolved it by deleting all nvidia drivers and packages and reinstalling them. After that, the glxgears and glxinfo worked like a charm...as well as parafoam. this is all in Ubuntu 9.04 amd64 with OF-1.5-dev of course with paraview 3.3. This was an issue with glx module. |
Hello ,
one of the solution that worked for me was this: http://www.starnet.com/xwin32kb/Coul...uffered_Visual if your ./ALLclean ./makeparaview and
ERROR: In /home/local/UNI/kumar.kannan/OpenFOAM/ThirdParty-1.7.x/paraview-3.8.0/VTK/Rendering/vtkXOpenGLRenderWindow.cxx, line 404 vtkXOpenGLRenderWindow (0x26398b0): Could not find a decent visual ERROR: In /home/local/UNI/kumar.kannan/OpenFOAM/ThirdParty-1.7.x/paraview-3.8.0/VTK/Rendering/vtkXOpenGLRenderWindow.cxx, line 404 vtkXOpenGLRenderWindow (0x26398b0): Could not find a decent visual X Error: BadValue (integer parameter out of range for operation) 2 Extension: 128 (Uknown extension) Minor opcode: 3 (Unknown request) Resource id: 0x21 ERROR: In /home/local/UNI/kumar.kannan/OpenFOAM/ThirdParty-1.7.x/paraview-3.8.0/VTK/Rendering/vtkXOpenGLRenderWindow.cxx, line 631 vtkXOpenGLRenderWindow (0x26398b0): Cannot create GLX context. Aborting. then try to just run export LIBGL_ALWAYS_INDIRECT=1 then try opening paraFoam or paraview. it should work. regards K.Suresh kumar |
Hi! I'm begginer in openFoam and Linux. Now I'm using CAE-Linux 2008 Live DVD. I don't install OS and openFoam on my hard disk. When I lunch paraview, I see the message
XLib: extension "GLX'' missing on display': 0.0". line 75 : 27415 Aborted. paraview paraFoam.pvs. What is wrong? Many thanks for any advice. |
HI
The message is clear glx libraries are not installed Type glxinfo on command prompt If the packages are not installed install openGL and glx then try it http://www.starnet.com/xwin32kb/Coul...uffered_Visual check this site it may help. regards K.SUresh kumar |
Many thanks, kumar!
|
Quote:
|
This is all that you need to fix it:-
export LIBGL_ALWAYS_INDIRECT=1 |
Found solution
Hi Stephane,
I had exactly the same problem. I know you already solved by changing the paraview version it but I hope this could be useful http://ubuntuforums.org/archive/inde...t-1418849.html Quote:
|
Quote:
|
All times are GMT -4. The time now is 06:44. |