CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Visualization & Post-Processing Software > ParaView

[OpenFOAM] Problem with paraFoam

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 9, 2008, 15:11
Default Problem with paraFoam
  #1
New Member
 
Simon Krueger
Join Date: Mar 2009
Posts: 1
Rep Power: 0
wandeklein is on a distinguished road
Hi,

I just started to use OpenFOAM and I am trying to implement a cylindrical coordinate system. That for I wrote new boundary conditions wich I included into the controlDict by: libs ( "mylib.so" );
The calculation with icoFoam works, but when I start paraFoam I get the following error:

simon@workstation:~/OpenFOAM/simon-1.4.1/run$ paraFoam . turbine
--> FOAM Warning :
From function dlLibraryTable::open(const fileName& functionLibName)
in file db/dlLibraryTable/dlLibraryTable.C at line 79
could not load /home/simon/OpenFOAM/simon-1.4.1/lib/linux64GccDPOpt/mylib.so: undefined symbol: _ZTIN4Foam5token8compoundE
fileName::stripInvalid() called for string newfile~
Aborted

When I add libs ( "libOpenFOAM.so" "mylib.so" ); according to http://www.cfd-online.com/OpenFOAM_D...tml?1218642042 I still get the error:

simon@workstation:~/OpenFOAM/simon-1.4.1/run$ paraFoam . turbine
fileName::stripInvalid() called for string newfile~
Aborted

Any sugestions? Thanks in advance.

Simon
wandeklein is offline   Reply With Quote

Old   October 9, 2008, 17:12
Default I guess somewhere in a filenam
  #2
Senior Member
 
Mattijs Janssens
Join Date: Mar 2009
Posts: 1,419
Rep Power: 26
mattijs is on a distinguished road
I guess somewhere in a filename or library you have a '~'. This is not supported.
mattijs is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[OpenFOAM] Visualization problem on ParaFoam Rider ParaView 10 June 27, 2016 11:19
[blockMesh] Problem with arc edge, arc doesen't appear in ParaFoam A.A. OpenFOAM Meshing & Mesh Conversion 2 September 4, 2012 08:01
Problem with paraFoam Arenio OpenFOAM 0 April 12, 2011 06:41
Graphics problem in ParaFoam Tarak OpenFOAM 0 October 28, 2010 20:10
[blockMesh] Problem using paraFoam to view cavityGrade mesh file felik9 OpenFOAM Meshing & Mesh Conversion 1 September 27, 2009 16:31


All times are GMT -4. The time now is 04:15.