[A.Wendy]

Hi,

i hope u can help me. At the moment i am experimating with OF 1.6 extend and GGI for a rotating grid. I need this for my master thesis.

I ran the analyses in parallel but after trying to reconstruct the mesh i get the following error.

does anyone have any experience of using GGI and parallel computing?

best whishes

Andy

/*---------------------------------------------------------------------------*\
| ========= | |
| \\ / F ield | OpenFOAM Extend Project: Open source CFD |
| \\ / O peration | Version: 1.6-ext |
| \\ / A nd | Web: www.extend-project.de |
| \\/ M anipulation | |
\*---------------------------------------------------------------------------*/
Build : 1.6-ext-959ec266ba5c
Exec : reconstructPar
Date : Sep 13 2012
Time : 07:40:28
Host : subuntu-desktop
PID : 4546
Case : /home/subuntu/OpenFOAM/Projekte/Masterthesis/reconst
nProcs : 1
SigFpe : Enabling floating point exception trapping (FOAM_SIGFPE).

// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //
Create time

Create mesh for time = 0

Initializing the GGI interpolator between master/shadow patches: insideSlider/outsideSlider
Initializing the GGI interpolator between master/shadow patches: insideSlider/outsideSlider
Initializing the GGI interpolator between master/shadow patches: insideSlider/outsideSlider
Initializing the GGI interpolator between master/shadow patches: insideSlider/outsideSlider

From function void GGIInterpolation<MasterPatch, SlavePatch>::rescaleWeightingFactors() const
in file /home/subuntu/OpenFOAM/OpenFOAM-1.6-ext/src/OpenFOAM/lnInclude/GGIInterpolationWeights.C at line 544
Uncovered faces found. On master: 1 on slave: 0
Initializing the GGI interpolator between master/shadow patches: insideSlider/outsideSlider

From function void GGIInterpolation<MasterPatch, SlavePatch>::rescaleWeightingFactors() const
in file /home/subuntu/OpenFOAM/OpenFOAM-1.6-ext/src/OpenFOAM/lnInclude/GGIInterpolationWeights.C at line 544
Uncovered faces found. On master: 1 on slave: 0
Initializing the GGI interpolator between master/shadow patches: insideSlider/outsideSlider
Initializing the GGI interpolator between master/shadow patches: insideSlider/outsideSlider

From function void GGIInterpolation<MasterPatch, SlavePatch>::rescaleWeightingFactors() const
in file /home/subuntu/OpenFOAM/OpenFOAM-1.6-ext/src/OpenFOAM/lnInclude/GGIInterpolationWeights.C at line 544
Uncovered faces found. On master: 1 on slave: 0
Initializing the GGI interpolator between master/shadow patches: insideSlider/outsideSlider
Initializing the GGI interpolator between master/shadow patches: insideSlider/outsideSlider


--> FOAM FATAL IO ERROR:
cannot open file

file: /home/subuntu/OpenFOAM/Projekte/Masterthesis/reconst/processor0/0/polyMesh/pointProcAddressing at line 0.

From function regIOobject::readStream()
in file db/regIOobject/regIOobjectRead.C at line 62.

FOAM exiting