CFD Online Logo CFD Online URL
Home > Forums > OpenFOAM Post-Processing

How to generate temperature profile using postChannel utility?

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   March 25, 2013, 15:19
Question How to generate temperature profile using postChannel utility?
Join Date: Dec 2011
Posts: 89
Rep Power: 8
ripperjack is on a distinguished road
Hi all,

I am simulating a channel flows with temperature equation. I use "postChannel" command to do the post-processing. But it seems that there is no temperature profile files generated by "postChannel" (velocity and pressure profiles are fine). Should I add some lines to the postChannel utility? Could you guys show me how to do this, thanks very much!
ripperjack is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
UDF temperature profile asal Fluent UDF and Scheme Programming 63 August 5, 2016 20:09
Unsteady temperature profile rachana Fluent UDF and Scheme Programming 2 December 29, 2012 10:16
Fully developed temperature profile for laminar/turbulent flow in FLUENT raghu.tejaswi FLUENT 10 November 7, 2012 10:57
UDF for linear temperature profile on horizontal parallel surfaces. Chirag2302 Fluent UDF and Scheme Programming 0 February 4, 2012 01:44
Model for a profile temperature inside a digester enzome STAR-CCM+ 4 November 11, 2011 15:44

All times are GMT -4. The time now is 13:41.