|
[Sponsors] |
July 18, 2013, 15:34 |
sample stl file at face centers
|
#1 |
Member
Ganesh Vijayakumar
Join Date: Jan 2010
Posts: 44
Rep Power: 16 |
hi !
Is there a method to force the sampling/interpolation onto stl files using "triSurfaceMesh" on the face centers instead the points on the edge of the face? ganesh |
|
Tags |
sample, stl, trisrufacemesh |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[swak4Foam] groovyBC in openFOAM-2.0 for parabolic velocity bc | ofslcm | OpenFOAM Community Contributions | 25 | March 6, 2017 10:03 |
what is swap4foam ?? | AB08 | OpenFOAM | 28 | February 2, 2016 01:22 |
channelFoam for a 3D pipe | AlmostSurelyRob | OpenFOAM | 3 | June 24, 2011 13:06 |
DecomposePar links against liblamso0 with OpenMPI | jens_klostermann | OpenFOAM Bugs | 11 | June 28, 2007 17:51 |
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues | michele | OpenFOAM Meshing & Mesh Conversion | 2 | July 15, 2005 04:15 |