[OpenFOAM] post-process results without paraFoam

Svensen · February 14, 2015, 14:16

Do someone know how to post process results of OpenFOAM simulation without usage of paraFOAM.

It seems that I have to create in case folder the file with .OpenFOAM extention and open it with paraview, but when I do this I've got a lot of errors.

It seems to me that paraview uses different OpenFOAM readers than paraFoam.
Maybe someone know how to install readers from paraFoam to paraview ??

opedrofunk · February 14, 2015, 19:48

Try the .foam extension. i.e.:

Code:

cd /path/to/your/case
touch post.foam
paraview post.foam

Select reconstructed case for serial, or decomposed case for parallel runs.

Svensen · February 15, 2015, 02:20

p, li { white-space: pre-wrap; } I've got the following errors:

ERROR: In /build/buildd/paraview-4.0.1/VTK/IO/Geometry/vtkOpenFOAMReader.cxx, line 6535
vtkOpenFOAMReaderPrivate (0x26bdbe0): Wrong list type for uniform field

_aneuryÀ
ERROR: In /build/buildd/paraview-4.0.1/VTK/IO/Geometry/vtkOpenFOAMReader.cxx, line 6535
vtkOpenFOAMReaderPrivate (0x26bdbe0): Wrong list type for uniform field

ERROR: In /build/buildd/paraview-4.0.1/VTK/Common/DataModel/vtkDataObjectTree.cxx, line 377
vtkMultiBlockDataSet (0x36d79a0): Structure does not match. You must use CopyStructure before calling this method.

February 14, 2015, 14:16	post-process results without paraFoam	#1
Svensen Senior Member Join Date: Jan 2015 Posts: 150 Rep Power: 11	Do someone know how to post process results of OpenFOAM simulation without usage of paraFOAM. It seems that I have to create in case folder the file with .OpenFOAM extention and open it with paraview, but when I do this I've got a lot of errors. It seems to me that paraview uses different OpenFOAM readers than paraFoam. Maybe someone know how to install readers from paraFoam to paraview ??

February 14, 2015, 19:48		#2
opedrofunk Member Peter Join Date: Feb 2015 Location: New York Posts: 73 Rep Power: 11	Try the .foam extension. i.e.: Code: cd /path/to/your/case touch post.foam paraview post.foam Select reconstructed case for serial, or decomposed case for parallel runs.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[OpenFOAM.com] paraFoam cannot open due to Qt issues - [Solved/Information]	u2berggeist	OpenFOAM Installation	2	July 2, 2018 17:03
Using CFD Post for OpenFoam results	Karpfen	OpenFOAM Post-Processing	3	January 19, 2018 08:48
View results at a contact region in CFD post	AGP	FLUENT	0	June 10, 2014 11:11
Parallel process & CFD POST	jypark	FLUENT	2	August 14, 2013 23:49
Adding results in CFX 11 post	Dimitri	CFX	0	February 5, 2008 04:28

February 15, 2015, 02:20		#3
Svensen Senior Member Join Date: Jan 2015 Posts: 150 Rep Power: 11	p, li { white-space: pre-wrap; } I've got the following errors: ERROR: In /build/buildd/paraview-4.0.1/VTK/IO/Geometry/vtkOpenFOAMReader.cxx, line 6535 vtkOpenFOAMReaderPrivate (0x26bdbe0): Wrong list type for uniform field _aneuryÀ ERROR: In /build/buildd/paraview-4.0.1/VTK/IO/Geometry/vtkOpenFOAMReader.cxx, line 6535 vtkOpenFOAMReaderPrivate (0x26bdbe0): Wrong list type for uniform field ERROR: In /build/buildd/paraview-4.0.1/VTK/Common/DataModel/vtkDataObjectTree.cxx, line 377 vtkMultiBlockDataSet (0x36d79a0): Structure does not match. You must use CopyStructure before calling this method.