|
[Sponsors] |
Setfields problem - Bigger region that the defined in setfieldDict |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
September 11, 2017, 11:10 |
Setfields problem - Bigger region that the defined in setfieldDict
|
#1 |
New Member
Join Date: Aug 2017
Posts: 18
Rep Power: 8 |
Hello!
For my simulation i have set a pressure point with the setFieldsDict with R = 0.02. Before running the simulation I checked the domain and the sphere (a circle actually since it a 2D geometry) was with R = 0.02. After the simulation, at the t = 0 the radius of the circle was changed and it was set to ~0.05... Why did that happen and how can I change it? In the pressure point I have defined the Pressure and the Temperature and it's a 2D simulation. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
User Defined Memory Problem | Melih | FLUENT | 17 | February 21, 2020 07:43 |
[Commercial meshers] Using starToFoam | clo | OpenFOAM Meshing & Mesh Conversion | 33 | September 26, 2012 04:04 |
[Other] StarToFoam error | Kart | OpenFOAM Meshing & Mesh Conversion | 1 | February 4, 2010 04:38 |
Nonconvergence in a multiple region Laplacian problem | kmurphy | OpenFOAM Running, Solving & CFD | 4 | June 8, 2006 04:40 |