spanwise average

eddykendo · April 29, 2019, 10:27

Hi, Foamers

I am working on a square cylinder problem in 3D on OF 4.0.
I am trying to spanwise average (here, z direction) the flow fields such as streamwise velocity, Reynolds stress components along y direction at a few x position.
I found a code somebody built from the past post, but it did not seem to work on OF 4.0.
If anybody has a code for this or knows how to easily do that using any other way on OF 4.xx, please let me know it.
I will appreciate you.

Thanks

syavash · May 3, 2019, 15:50

Quote:

Originally Posted by eddykendo

Hi, Foamers

I am working on a square cylinder problem in 3D on OF 4.0.
I am trying to spanwise average (here, z direction) the flow fields such as streamwise velocity, Reynolds stress components along y direction at a few x position.
I found a code somebody built from the past post, but it did not seem to work on OF 4.0.
If anybody has a code for this or knows how to easily do that using any other way on OF 4.xx, please let me know it.
I will appreciate you.

Thanks

I had modified a tool for ver. 4.1 based on an old version. Hope it works for you.

Regards,
Syavash

eddykendo · May 3, 2019, 23:52

Hi, Asgari

I really appreciate you for your code.
This really saves my time.

Thank you again!

AbdulazizAlkandari · September 2, 2019, 16:06

Hi Ehsan,
Does the whole mesh need to be structured or only the direction I would like to be averaged?

syavash · September 3, 2019, 00:34

Quote:

Originally Posted by AbdulazizAlkandari

Hi Ehsan,
Does the whole mesh need to be structured or only the direction I would like to be averaged?

Hi,

Well I PRESUME it should work. Please tell us the result if you tried it.

Regards,
Syavash

April 29, 2019, 10:27	spanwise average	#1
eddykendo Member DongHo Join Date: Jul 2013 Posts: 51 Rep Power: 12	Hi, Foamers I am working on a square cylinder problem in 3D on OF 4.0. I am trying to spanwise average (here, z direction) the flow fields such as streamwise velocity, Reynolds stress components along y direction at a few x position. I found a code somebody built from the past post, but it did not seem to work on OF 4.0. If anybody has a code for this or knows how to easily do that using any other way on OF 4.xx, please let me know it. I will appreciate you. Thanks alonely3000 likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Near wall treatment in k-omega SST	Arnoldinho	OpenFOAM Running, Solving & CFD	38	March 8, 2017 13:48
How to get spanwise average in Tecplot?	ivanbuz	Tecplot	3	July 17, 2014 15:08
Spanwise Average Nussel Number Along Flow	saksham.pachar	FLUENT	3	December 23, 2011 04:30
A hard one: how to get spanwise average in Fluent?	ivanbuz	FLUENT	2	February 17, 2011 02:44
Spanwise average in StarCCM+	Subhadeep Gan	Siemens	3	April 12, 2007 20:46

May 3, 2019, 23:52		#3
eddykendo Member DongHo Join Date: Jul 2013 Posts: 51 Rep Power: 12	Hi, Asgari I really appreciate you for your code. This really saves my time. Thank you again!

September 2, 2019, 16:06		#4
AbdulazizAlkandari New Member Abdulaziz Alkandari Join Date: Apr 2019 Posts: 6 Rep Power: 7	Hi Ehsan, Does the whole mesh need to be structured or only the direction I would like to be averaged?