Sample a volume field from mesh

comingdaytime · March 16, 2018, 05:57

Dear Foamers,

Because I need to do analysis in a specific region of my LES simulation, i need to sample a sub-field of the cylinder mesh. The sampled field (volume) is like a smaller cylinder inside the current cylinder mesh. I have checked a lot on the Internet, couldn'd find a solution. It seems that the sample function only support the set and surface sampling.

Any suggestions?

Thanks lot!

Best

Litchy

sjlouie91 · January 16, 2019, 10:47

Hi Litchy,

I am now running across the same problem as you. Have you solved this problem? I know that 'volRegion' can be used for cellZone, but I can only get the volume-averaged value rather than the values for each cell in cellZone.

Kind regards,
Jin

March 16, 2018, 05:57	Sample a volume field from mesh	#1
comingdaytime Member Zhiyi Li Join Date: Mar 2015 Location: Germany Posts: 43 Rep Power: 11	Dear Foamers, Because I need to do analysis in a specific region of my LES simulation, i need to sample a sub-field of the cylinder mesh. The sampled field (volume) is like a smaller cylinder inside the current cylinder mesh. I have checked a lot on the Internet, couldn'd find a solution. It seems that the sample function only support the set and surface sampling. Any suggestions? Thanks lot! Best Litchy

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to use "translation" in solidBodyMotionFunction in OpenFOAM	rupesh_w	OpenFOAM Running, Solving & CFD	5	August 16, 2016 04:27
[mesh manipulation] Importing Multiple Meshes	thomasnwalshiii	OpenFOAM Meshing & Mesh Conversion	18	December 19, 2015 18:57
[ICEM] Negative volume error in hybrid mesh	siw	ANSYS Meshing & Geometry	4	September 3, 2014 05:25
Problem with rhoSimpleFoam	matteo_gautero	OpenFOAM Running, Solving & CFD	0	February 28, 2008 06:51
How to control Minximum mesh space?	hung	FLUENT	7	April 18, 2005 09:38

January 16, 2019, 10:47		#2
sjlouie91 New Member Jin Zhang Join Date: May 2018 Location: Germany Posts: 15 Rep Power: 7	Hi Litchy, I am now running across the same problem as you. Have you solved this problem? I know that 'volRegion' can be used for cellZone, but I can only get the volume-averaged value rather than the values for each cell in cellZone. Kind regards, Jin