[vahidreza lotfi]

I`m run sloshingtank3d in foamextend 4.0 , interDyMFoam gives the following errors when the point probe is on the wall:
Searching for probe point locations
--> FOAM Warning :
From function probes::read()
in file probes/probes.C at line 73
Did not find location (0 9.95 19.77) in any cell. Skipping location.
--> FOAM Warning :
From function probes::read()
in file probes/probes.C at line 73
Did not find location (0 -9.95 19.77) in any cell. Skipping location.
Time = 0.07
based on the referenced error message, it appears that the probe remains static and dose not move with the mesh.
I created a new solver in foam extend 4.0, and I have to use probe Location to validation results my work. now that the foam extend does not support the probe location in dynamicMesh, what should I do?

[wyldckat]

Greetings vahidreza lotfi,

Sorry for the late reply, but I only now did I manage to take a quick look into this.

The problem is that the probes in foam-extend 4 do not yet have the ability to move with the mesh.
You will have to build the branch "nextRelease" on the foam-extend 4 repository, in order to access this feature.

Unfortunately I don't see an easy way to simply use the sampling library from this release on foam-extend 4.0, due to several core changes having been done on it.

Best regards,
Bruno

[vahidreza lotfi]

Hi bruno
Thanks so much for your reply.

I went to Paraview to solve this problem.And I got the right answers from Paraview.

Best regards,
Vahid