reconstructPar error in coalChemistryFoam

Sean Zhao · December 13, 2018, 06:07

Hi,
Everyone, I am using coalChemistryFoam to calculate gas-solid two phase flow with mpi function. But the weird thing is that when I use reconstructPar, it just doesn't work. The error is shown in the picture attached. Does anyone know how to solve it? The reconstructPar function worked well when I tested the cavity case which icoFoam. Is it possible that the reconstructPar function cannot process solid particles which are calculated by lagrangian method?

ssa_cfd · December 13, 2018, 08:08

if you just need to visualize the data, type paraFoam -builtin and you can view the results without reconstructing.!

Sean Zhao · December 13, 2018, 09:00

That didn't work cause I only saw geometry without data. I modified the decomposeParDict, re-blockMesh, re-decomposePar and, anyway, it works. Thank you all the same.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
coalChemistryFoam	karam	OpenFOAM	10	March 19, 2021 03:27
reconstructPar nor working	Priya Somasundaran	OpenFOAM Post-Processing	2	January 28, 2016 14:37
reconstructPar and a high number of snapshots	fs82	OpenFOAM Programming & Development	2	April 18, 2012 04:37
Problem with reconstructPar	Jochem	OpenFOAM Post-Processing	3	March 24, 2011 12:44
Problem with reconstructPar	fabianpk	OpenFOAM	5	August 14, 2007 09:17

December 13, 2018, 08:08		#2
ssa_cfd Member ssa Join Date: Sep 2018 Posts: 93 Rep Power: 7	if you just need to visualize the data, type paraFoam -builtin and you can view the results without reconstructing.!

December 13, 2018, 09:00		#3
Sean Zhao New Member Xiang Zhao Join Date: Nov 2018 Posts: 6 Rep Power: 7	That didn't work cause I only saw geometry without data. I modified the decomposeParDict, re-blockMesh, re-decomposePar and, anyway, it works. Thank you all the same.