CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Post-Processing

change courant number of particles using Lagrange solver

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 29, 2019, 06:29
Default change courant number of particles using Lagrange solver
  #1
New Member
 
Join Date: Sep 2019
Posts: 8
Rep Power: 2
johanning is on a distinguished road
hello

how I can change the Courant number of particles while using a Lagrange solver?

thanks for your help!
johanning is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
LES, Courant Number, Crash, Sudden Alhasan OpenFOAM Running, Solving & CFD 3 October 31, 2019 05:01
decomposePar -allRegions stru OpenFOAM Pre-Processing 2 August 25, 2015 04:58
foam-extend_3.1 decompose and pyfoam warning shipman OpenFOAM 3 July 24, 2014 09:14
Unaligned accesses on IA64 andre OpenFOAM 5 June 23, 2008 11:37
Could anybody help me see this error and give help liugx212 OpenFOAM Running, Solving & CFD 3 January 4, 2006 19:07


All times are GMT -4. The time now is 10:38.