sound pressure level (SPL) of a pressure signal (probes))

Tobi Wehr · January 7, 2020, 05:19

Hello everybody,

I am new to this forum and this is my first thread.

About my problem:

I have done a simulation with OpenFOAM. For this I used "probes" in controlDict to write out pressure data over time.
Now I would like to evaluate this data.
I would like to plot the sound pressure level over the frequency (FFT), if possible with matlab or paraview.
I have already done some research, but unfortunately I haven't found anything yet, which is helpful.

Has anyone had experience with this and can please help me?
Many thanks in advance!

Best regards

Tobi

Krao · January 9, 2020, 03:45

Hi Tobi Wehr,

I am also curious to know how this can be done in OpenFOAM, please don't forget to share your experience once you find it.

K. Rao

Tobi Wehr · January 9, 2020, 04:00

Hi K. Rao

so far I haven't been able to make any progress.

I once read about a noiseDict, but so far I do not know how exactly this application works.

Tobi

esma · February 5, 2024, 21:34

This post is way overdue but I found this link to Matlab in case you have access to it:

https://au.mathworks.com/matlabcentr...vel-calculator

January 7, 2020, 05:19	sound pressure level (SPL) of a pressure signal (probes))	#1
Tobi Wehr New Member Tobi Wehr Join Date: Jan 2020 Posts: 7 Rep Power: 6	Hello everybody, I am new to this forum and this is my first thread. About my problem: I have done a simulation with OpenFOAM. For this I used "probes" in controlDict to write out pressure data over time. Now I would like to evaluate this data. I would like to plot the sound pressure level over the frequency (FFT), if possible with matlab or paraview. I have already done some research, but unfortunately I haven't found anything yet, which is helpful. Has anyone had experience with this and can please help me? Many thanks in advance! Best regards Tobi

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
question regarding LES of pipe flow - pimpleFoam	Dan1788	OpenFOAM Running, Solving & CFD	37	December 26, 2017 14:42
CFX Solver stopped with error when requested for backup during solver running	Mfaizan	CFX	40	May 13, 2016 06:50
Gas pressure question	Dan Moskal	Main CFD Forum	0	October 24, 2002 22:02
Terrible Mistake In Fluid Dynamics History	Abhi	Main CFD Forum	12	July 8, 2002 09:11
Hydrostatic pressure in 2-phase flow modeling (long)	DS & HB	Main CFD Forum	0	January 8, 2000 15:00

January 9, 2020, 03:45		#2
Krao Senior Member Kmeti Rao Join Date: May 2019 Posts: 145 Rep Power: 7	Hi Tobi Wehr, I am also curious to know how this can be done in OpenFOAM, please don't forget to share your experience once you find it. K. Rao

January 9, 2020, 04:00		#3
Tobi Wehr New Member Tobi Wehr Join Date: Jan 2020 Posts: 7 Rep Power: 6	Hi K. Rao so far I haven't been able to make any progress. I once read about a noiseDict, but so far I do not know how exactly this application works. Tobi

February 5, 2024, 21:34		#4
esma Member Join Date: May 2016 Posts: 35 Rep Power: 9	This post is way overdue but I found this link to Matlab in case you have access to it: https://au.mathworks.com/matlabcentr...vel-calculator