CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Post-Processing

Patches created but not viewed by paraview

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 2, 2020, 05:06
Default Patches created but not viewed by paraview
  #1
New Member
 
Join Date: Sep 2020
Posts: 2
Rep Power: 0
furystep is on a distinguished road
Hi everyone,
I have a weird problem with paraview. I am using snappyHexMesh for internal meshes, in this case a simple elbow. I have written an allrun file to launch different utilities I wrote in c++ to manage and edit the dictionaries. During the process, after blockMesh, surfaceFeatureExtract and decomposePar, I launch snappyHexMesh only for the castellatedMesh and the snapping phases. After them I find the internal mesh which has a unique boundary (a wall named "solid"). So, I launch an external utility which writes topoSetDict and a createPatchDict to define inlet and outlet (I create ONLY these two patches, because the remaining boundaries are walls, called "solid"). These processes are completed successfully. Then, I change the snappyHexMesh in order to complete the phase of layers addition only on "solid", which is the remaining wall. The problem is that when I open controlDict from paraview I find 3 mesh steps, castellated mesh, snapped and a third step in which the new boundaries do not exist, as if the controlDict has not been updated. It seems that the addition layers overwrite the file, even if the layers do not exist.

Someone could help me please?
furystep is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[blockMesh] viewing mesh in paraview tenichols19 OpenFOAM Meshing & Mesh Conversion 0 October 2, 2019 08:55
[snappyHexMesh] Problem with decomposePar, snappyHexMesh luca1992 OpenFOAM Meshing & Mesh Conversion 12 August 23, 2017 20:06
[OpenFOAM] Streamlines through cyclic patches in Paraview kornickel ParaView 3 January 28, 2016 07:59
[OpenFOAM] saving data in paraview aylalisa ParaView 3 May 31, 2014 12:38
CFX4.3 -build analysis form Chie Min CFX 5 July 13, 2001 00:19


All times are GMT -4. The time now is 15:21.