|
[Sponsors] |
problem running postChannel utility for non-hex meshes |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
October 21, 2021, 16:04 |
problem running postChannel utility for non-hex meshes
|
#1 |
New Member
Himani
Join Date: Apr 2016
Posts: 1
Rep Power: 0 |
Hey fellas, I am trying to use the postprocessing utility called postChannel using OF version 7, but I get the following error. To my understanding, this is related to non-hex cells. Has anyone tried to work with it for non-hex meshes? Do you have any suggestions or alternatives?
Thank you, HTML Code:
ignore@7b88cbd539b1:~/workingDir/SHM_test$ postChannel /*---------------------------------------------------------------------------*\ ========= | \\ / F ield | OpenFOAM: The Open Source CFD Toolbox \\ / O peration | Website: https://openfoam.org \\ / A nd | Version: 7 \\/ M anipulation | \*---------------------------------------------------------------------------*/ Build : 7-1ff648926f77 Exec : /opt/openfoam7/platforms/linux64GccDPInt32Opt/bin/postChannel Date : Oct 21 2021 Time : 19:26:50 Host : "7b88cbd539b1" PID : 416 I/O : uncollated Case : /home/openfoam/workingDir/SHM_test nProcs : 1 sigFpe : Enabling floating point exception trapping (FOAM_SIGFPE). fileModificationChecking : Monitoring run-time modified files using timeStampMaster (fileModificationSkew 10) allowSystemOperations : Allowing user-supplied system call operations // * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * // Create time Create mesh for time = 0 Reading transportProperties --> FOAM FATAL ERROR: Face:206126 neighbour cell:5(978543 978544 206126 978536 978539) is not a hex? From function void Foam::channelIndex::walkOppositeFaces(const Foam::polyMesh&, const labelList&, Foam::boolList&) in file channelIndex.C at line 138. FOAM aborting #0 Foam::error::printStack(Foam::Ostream&) at ??:? #1 Foam::error::abort() at ??:? #2 ? at ??:? #3 ? at ??:? #4 ? at ??:? #5 ? at ??:? #6 __libc_start_main in "/lib/x86_64-linux-gnu/libc.so.6" #7 ? at ??:? qemu: uncaught target signal 6 (Aborted) - core dumped Aborted |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Problem with my setField | ShanuNith | OpenFOAM Pre-Processing | 0 | November 1, 2019 07:27 |
pimpleDyMFoam - rho not found | maasyraf3 | OpenFOAM Running, Solving & CFD | 10 | June 5, 2017 13:05 |
[blockMesh] apparently the mesh doesn't want to be created in one direction | Maxime Thomas | OpenFOAM Meshing & Mesh Conversion | 1 | August 18, 2012 06:05 |
problem in running icoFoam | Alucard | OpenFOAM | 2 | March 17, 2012 09:01 |
Getting prism to inflate into mixed tet-hex meshes | Joe | CFX | 16 | October 10, 2011 07:06 |