CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Post-Processing

Postprocessing average Temperature in a specific direction

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 27, 2022, 16:02
Default Postprocessing average Temperature in a specific direction
  #1
New Member
 
Christian Pinzón
Join Date: Apr 2022
Posts: 6
Rep Power: 3
davcrisp is on a distinguished road
I want to calculate the average Temperature in the "x" direction in a flat parallel plane, to the plane showed in figure 1, when the simulation is over. But I have no idea how I can create a parallel plane in the downstream part and then calculate the average in the cross section. Could you give me any advice to solve that? Thanks
Attached Images
File Type: png flatplate.png (4.3 KB, 3 views)
File Type: png fullDomain.png (14.9 KB, 4 views)
davcrisp is offline   Reply With Quote

Reply

Tags
average temperature, flat plate, mean temperature

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Setting the height of the stream in the free channel kevinmccartin CFX 12 October 13, 2022 22:43
Ansys Fluent UDF, Wall Average Temperature Depend On Inlet Velocity ozgeozge Fluent UDF and Scheme Programming 1 April 15, 2019 02:31
Multiphase flow - incorrect velocity on inlet Mike_Tom CFX 6 September 29, 2016 02:27
Calculation of the Governing Equations Mihail CFX 7 September 7, 2014 07:27
Two-Phase Buoyant Flow Issue Miguel Baritto CFX 4 August 31, 2006 13:02


All times are GMT -4. The time now is 16:42.