|
[Sponsors] |
March 14, 2005, 09:35 |
Hi,
I have TecPlot version
|
#1 |
Senior Member
Pei-Ying Hsieh
Join Date: Mar 2009
Posts: 317
Rep Power: 18 |
Hi,
I have TecPlot version 9 for MS windows. Is it possible to export data (transient problems) so that they can be read by TecPlot 9 on MS Windows? Thanks! Pei |
|
March 14, 2005, 20:20 |
Convert the result data into f
|
#2 |
New Member
Hyung min Kim
Join Date: Mar 2009
Location: Suwon-shi, Kyonggi-Do, Korea
Posts: 14
Rep Power: 17 |
Convert the result data into fluent data format
then, you can import the data by tecplot. |
|
March 16, 2005, 11:48 |
Hi Guys
I did convert the f
|
#3 |
Member
|
Hi Guys
I did convert the foam data to fluent using foamDataToFluent but it converts only the field of time = 0. What I must to do in order to convert the others times which are stored into their respectives directories? Tanks! Wladimyr |
|
March 16, 2005, 11:56 |
foamDataToFluent is currently
|
#4 |
Senior Member
Join Date: Mar 2009
Posts: 854
Rep Power: 22 |
foamDataToFluent is currently setup to convert the time you specify as startTime in controlDict. Try setting startTime to latestTime.
|
|
March 16, 2005, 13:22 |
I converted both mesh and data
|
#5 |
Member
Ali Heidari
Join Date: Mar 2009
Location: Surrey, London, United Kingdom
Posts: 39
Rep Power: 17 |
I converted both mesh and data from Foam for Fluent. When I wanted to import only the mesh (no data) it into Tecplot ver. 10, there was an error:
"Error reading section number in file" When I pressed "ok", Tecplot brought the mesh. But when I tried to import both mesh and data into Tecplot, I got the same error: "Error reading section number in file" After pressing, "OK", another error popped up: "ZoneID 1 referenced in data file is a node zone". and when I clicked "OK", it DIDN'T even load the mesh itself. Seems it's not possible to see the Anybody, has experienced similar thing? |
|
April 7, 2005, 21:31 |
I have the same question as Al
|
#6 |
Member
Luckyluke
Join Date: Mar 2009
Posts: 51
Rep Power: 17 |
I have the same question as Ali.
|
|
August 28, 2008, 11:11 |
I too am getting the same prob
|
#7 |
New Member
Gemma Coughlin
Join Date: Mar 2009
Posts: 2
Rep Power: 0 |
I too am getting the same problem as Ali, using tecplot 360 does anyone have any ideas how to fix this?
Cheers Gemma |
|
September 2, 2008, 16:00 |
Below is a copy of my Post.sh
|
#8 |
Member
Dennis Kingsley
Join Date: Mar 2009
Location: USA
Posts: 45
Rep Power: 17 |
Below is a copy of my Post.sh script that I use with Tecplot 360 and OF1.5. If you don't have preplot on your OF machine just comment it out. The foamToTecplot was posted in one of the forum messages for 1.4.1-dev, I had no problem compiling it under 1.5.
the first parameter is the case and the second is the time step to extract. #!/bin/sh reconstructPar -case $1 -time $2 foamToTecplot -case $1 -time $2 preplot ./$1/TecplotData/$2.dat gzip ./$1/TecplotData/$2.plt rm ./$1/TecplotData/$2.dat |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
How to read tecplot file witout tecplot ? | Pol | Tecplot | 11 | March 2, 2007 07:26 |