|
[Sponsors] |
July 14, 2007, 12:26 |
I am new to OpenFoam. I get th
|
#1 |
Senior Member
Senthil Kabilan
Join Date: Mar 2009
Posts: 113
Rep Power: 17 |
I am new to OpenFoam. I get the following error message when I use foamToGMV:
--> FOAM FATAL IO ERROR : cannot open file file: /home/skabilan/workdir/openfoam/weibel/weibel/constant/conversionProperties at line 0. Thanks for your help! |
|
July 14, 2007, 13:19 |
The error message suggests tha
|
#2 |
Senior Member
Srinath Madhavan (a.k.a pUl|)
Join Date: Mar 2009
Location: Edmonton, AB, Canada
Posts: 703
Rep Power: 21 |
The error message suggests that the foamToGMV utility requires a file named conversionProperties to be present in the constant directory. You can either ask someone if they have a sample file or reverse-engineer the contents of the file yourself by creating it.
|
|
July 14, 2007, 13:35 |
Thanks! I tried creating a fil
|
#3 |
Senior Member
Senthil Kabilan
Join Date: Mar 2009
Posts: 113
Rep Power: 17 |
Thanks! I tried creating a file but I get the following error. I need to get the header right for the conversionProperties file. Any help is appreciated.
--> FOAM FATAL IO ERROR : problem while reading header for object conversionProperties file: /home/skabilan/workdir/openfoam/weibel/weibel/constant/conversionProperties at line 1. From function regIOobject::readStream(const word&) in file db/regIOobject/regIOobjectRead.C at line 75. FOAM exiting |
|
July 14, 2007, 15:34 |
Try copying the standard heade
|
#4 |
Senior Member
Srinath Madhavan (a.k.a pUl|)
Join Date: Mar 2009
Location: Edmonton, AB, Canada
Posts: 703
Rep Power: 21 |
Try copying the standard headers from say blockMeshDict and try again. If that works, you'll get a new error message stating which variable was not defined. Then you create this variable inside the file and try to figure out its format based on the next error message. I know this can be tiresome, but it is also a sure way to get the utility to work.
|
|
May 21, 2008, 08:09 |
I converted engine simulation
|
#5 |
Member
Tomislav Sencic
Join Date: Mar 2009
Posts: 42
Rep Power: 17 |
I converted engine simulation results with foamToGMV, but the mesh is not moving. To convert the node coordinates there should be a file region0/points in each time directory. Where can I find such file?
|
|
June 10, 2008, 19:54 |
Hi Tomislav,
Where did you
|
#6 |
Senior Member
Senthil Kabilan
Join Date: Mar 2009
Posts: 113
Rep Power: 17 |
Hi Tomislav,
Where did you get the conversionProperties file? which OpenFOAM looks for when we try the foamToGmv. Thanks Senthil |
|
August 24, 2012, 13:21 |
|
#7 |
New Member
Anonymous
Join Date: Aug 2012
Posts: 8
Rep Power: 13 |
Hi Senthil,
I know this is an old thread, but I was wondering if you were able to make or get a sample of the conversionProperties file. I'm trying to use foamToGMV as well and wanted to see if you already had a sample you wouldn't mind sharing. Thanks |
|
August 24, 2012, 17:31 |
|
#8 |
Retired Super Moderator
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,975
Blog Entries: 45
Rep Power: 128 |
Greetings Tiffany,
Since this is pretty much the only thread specific for foamToGMV, I guess we might as well finish it off with a proper solution I've checked the source code and did some tests. Here is the wiki page that shows all that probably you'll need to know: http://openfoamwiki.net/index.php/FoamToGMV Best regards, Bruno
__________________
|
|
August 24, 2012, 20:05 |
|
#9 |
New Member
Anonymous
Join Date: Aug 2012
Posts: 8
Rep Power: 13 |
Thank you, Bruno. That was exactly was I was looking for!
|
|
|
|