Problem with npoints in Sampling

prapanj · April 23, 2009, 05:07

Hi,

I want a line plot of out a 3d domain along a probe line. In my sampleDict, when I set npoints to 20 for a particular line, everything is fine. But if I change this number to increase the resolution, it doesn't work ( I mean when I run sample, it just says create mesh for time = 0 and hangs in there forever).

My grid definitely has more than 20 points. I had tried setting npoints to 19,21, 30,35, 40, 100 etc points. The same issue.

Now, there is another line in the domain for which I could set to other numbers and it works.

I have made sure I don't make any syntax error in setting npoints. What could possibly be wrong?

Thank you
Prapanj

smehdi609 · April 24, 2009, 16:21

http://www.cfd-online.com/Forums/ope...-problems.html

April 23, 2009, 05:07	Problem with npoints in Sampling	#1
prapanj Senior Member Prapanch Nair Join Date: Mar 2009 Location: Bangalore, India Posts: 105 Rep Power: 17	Hi, I want a line plot of out a 3d domain along a probe line. In my sampleDict, when I set npoints to 20 for a particular line, everything is fine. But if I change this number to increase the resolution, it doesn't work ( I mean when I run sample, it just says create mesh for time = 0 and hangs in there forever). My grid definitely has more than 20 points. I had tried setting npoints to 19,21, 30,35, 40, 100 etc points. The same issue. Now, there is another line in the domain for which I could set to other numbers and it works. I have made sure I don't make any syntax error in setting npoints. What could possibly be wrong? Thank you Prapanj

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
UDF compiling problem	Wouter	Fluent UDF and Scheme Programming	6	June 6, 2012 04:43
Incoherent problem table in hollow-fiber spinning	Gianni	FLUENT	0	April 5, 2008 10:33
natural convection problem for a CHT problem	Se-Hee	CFX	2	June 10, 2007 06:29
Adiabatic and Rotating wall (Convection problem)	ParodDav	CFX	5	April 29, 2007 19:13
convergence problem	Trushar	Phoenics	5	August 27, 2002 23:40

April 24, 2009, 16:21		#2
smehdi609 Member M. Mahdi Salehi Join Date: Mar 2009 Location: Vancouver, BC, Canada Posts: 50 Rep Power: 17	http://www.cfd-online.com/Forums/ope...-problems.html