CFD Online Discussion Forums

CFD Online Discussion Forums (
-   OpenFOAM Post-Processing (
-   -   Knudsen Number (

sandro.grm February 19, 2010 04:10

Knudsen Number

I would need a post-processing tool like Mach for the Knudsen number. I was searching how to obtain dynamic viscosity (if Kn:=const*Ma/Re) for the calculation of Reynolds number for the compressible flow, but wasn't able to find any good example.
The question is which object stores the>T) reference and how do I initialise it. I was looking in the applications/utilities/postProcessing/velocityField/Mach example and there is almost all I need, except the access to dynamic viscosity (I use sutherlandTransport model for the pure nitrogen gas).
Can please someone help me to construct this tool.

Thanks for help in advance.

Best, Sandro

sandro.grm February 19, 2010 09:17

I did something, but the characteristic length scale has to be moved into the dictionary. Now I take it as an internal constant. Source should be in attach.

sandro.grm February 19, 2010 09:21

1 Attachment(s)
sorry, didn't upload due to missing extension "tgz".

All times are GMT -4. The time now is 19:52.