|
[Sponsors] |
[paraFoam]More than six unsigned transforms detected? |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
March 16, 2012, 19:35 |
[paraFoam]More than six unsigned transforms detected?
|
#1 |
New Member
Hsingtzu Wu
Join Date: Feb 2011
Posts: 24
Rep Power: 15 |
Hello
My model had cyclic boundary conditions. checkMesh OK. I used icoFoam to solve it, and the courant number was always less than 1. However, when I was using paraFoam to view the result, I got the following error message. Code:
--> FOAM FATAL ERROR: More than six unsigned transforms detected: 6(((-1.26 0.207 1.38778e-17) (1 0 0 0 1 0 0 0 1) 0) ((-1.26 -0.069 0) (1 0 0 0 1 0 0 0 1) 0) ((-1.26 0.802 -1.38778e-17) (1 0 0 0 1 0 0 0 1) 0) ((-1.26 -0.654 0) (1 0 0 0 1 0 0 0 1) 0) ((-1.191 -1.26 0) (1 0 0 0 1 0 0 0 1) 0) ((-0.777 -1.26 0) (1 0 0 0 1 0 0 0 1) 0)) I was wondering if anyone could kindly provide some suggestions the package is available at http://dl.dropbox.com/u/20517550/cell3.zip Thanks Hsingtzu |
|
July 15, 2014, 05:48 |
|
#2 |
Senior Member
Julien
Join Date: Jun 2012
Location: France
Posts: 152
Rep Power: 13 |
Hi M. Wu,
Did you solve your problem ? I have a similar problem using sHM (cf. this thread on cfd-online.com). Thank you, |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Divergence detected in AMG solver: ads-0 | Patrino | FLUENT | 6 | May 12, 2022 04:11 |
unsigned transforms detected | Smed | OpenFOAM Post-Processing | 7 | June 17, 2016 12:27 |
Quarter Burner mesh with periosic condition | SamCanuck | FLUENT | 2 | August 31, 2011 12:34 |
user subroutine error | CFDUSER | CFX | 2 | December 9, 2006 07:31 |
user defined function | cfduser | CFX | 0 | April 29, 2006 11:58 |