|April 2, 2013, 04:47||
Boundary condition in a multiphase flow
Join Date: Mar 2013
Posts: 94Rep Power: 6
Hi to all,
I have a problem in the setting of the boundary condition of a multiphase flow using interfoam.
My case is summarized as follow:
at the initial time t=0 the right wall of a closed tube completely filled with a liquid is removed, allowing the liquid to exit the domain and, at the same time, allowing the gas to enter.
I set this boundary condition:
U) fixedValue (0,0,0) in the pipe wall and in the left inlet, zeroGradient in the outlet
p) zeroGradient in the pipe wall and in the left inlet, fixedValue of 1 atm in the outlet
alpha) zeroGradient in the pipe wall. For the left inlet and the outlet I tried some case:
but all this case give me strange solution
Someone have an idea to set the boundary condition for this case?
thank to all
|alpha1, boundary condition, interfoam, multi phase|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Outlet boundary condition for a heated tube flow||JinBiao||OpenFOAM Running, Solving & CFD||0||July 28, 2012 03:56|
|flow in duct-fixed pressure boundary condition||sepidehkavousi||Main CFD Forum||9||May 20, 2012 12:11|
|Airfoil boundary condition||Frank||Main CFD Forum||1||April 21, 2008 18:36|
|outflow boundary condition for multiphase flow||deepak||FLUENT||1||June 21, 2007 08:23|