CFD Online Logo CFD Online URL
Home > Forums > OpenFOAM Pre-Processing

How to set faces for fluid?

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   June 10, 2013, 04:19
Default How to set faces for fluid?
Join Date: May 2013
Posts: 51
Rep Power: 6
seav is on a distinguished road
Greetings Openfomers!

I have question about, "how to set faces for fluid" in my case. I havent found 3D case with such problem yet. Thats why I am posting here.

I will describe problem as simple as I can, but to get what i meant you have to look on mesh/case. Files are attached.

I have divided geometery into blocks(fluid too). Its described in blockMeshDict. Everything seems to be ok, but the results are awful. Only 2 blocks did calculations, first and last. Blocks between didnt calculate. I know why, the wrong initial conditions. I tried many times to set them properly but its still missing in whole part. To get what I mean please silce the geometery for ex. 0.008 by axis Y.

I hope someone can help me. Its the last problem to finish my project.

Attached Files
File Type: gz c1.tar.gz (40.1 KB, 0 views)
seav is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
DecomposePar unequal number of shared faces maka OpenFOAM Pre-Processing 6 August 12, 2010 09:01
Unaligned accesses on IA64 andre OpenFOAM 5 June 23, 2008 10:37
Smooth Grid Error! Help seasoul FLUENT 1 March 24, 2008 11:56
Error to re-open fluent case file J.Gimbun FLUENT 0 April 27, 2006 08:42
How to set environment variables kanishka OpenFOAM Installation 1 September 4, 2005 10:15

All times are GMT -4. The time now is 09:14.