Boundary conditions for hassan hemida interFoam tutorial
 

Hello, I am also trying to simulate the InterFoam tutorial, written by Hassan Hemida, I have used the boundary conditions given below but unable to reproduce the same result as given in the tutorial for the laminar case (doing laminar case first). May anyone kindly look at the initial boundary conditions and let me know whether it is fine or not.(I am trying to simulate water jet into air using interFoam.)

For U:
/*--------------------------------*- C++ -*----------------------------------*\
| ========= | |
| \\ / F ield | OpenFOAM: The Open Source CFD Toolbox |
| \\ / O peration | Version: 2.1.1 |
| \\ / A nd | Web: www.OpenFOAM.org |
| \\/ M anipulation | |
\*---------------------------------------------------------------------------*/
FoamFile
{
version 2.0;
format ascii;
class volVectorField;
location "0";
object U;
}
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //

dimensions [0 1 -1 0 0 0 0];

internalField uniform (0 0 0);

boundaryField
{
inlet
{
type fixedValue;
value uniform (0 -0.1 0);
}
inletWall
{
type fixedValue;
value uniform (0 0 0);
}
bottomWall
{
type fixedValue;
value uniform (0 0 0);
}
atmosphere
{
type inletOutlet;
inletValue uniform (0 0 0);
value uniform (0 0 0);
}
frontAndBack
{
type empty;
}
}


// ************************************************** *********************** //

For P_rgh

/*--------------------------------*- C++ -*----------------------------------*\
| ========= | |
| \\ / F ield | OpenFOAM: The Open Source CFD Toolbox |
| \\ / O peration | Version: 2.1.1 |
| \\ / A nd | Web: www.OpenFOAM.org |
| \\/ M anipulation | |
\*---------------------------------------------------------------------------*/
FoamFile
{
version 2.0;
format ascii;
class volScalarField;
object p_rgh;
}
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //

dimensions [1 -1 -2 0 0 0 0];

internalField uniform 0;

boundaryField
{
inlet
{
type zeroGradient;

}
inletWall
{
type zeroGradient;
}
bottomWall
{
type zeroGradient;

}

atmosphere
{
type totalPressure;
p0 uniform 0;
U U;
phi phi;
rho rho;
psi none;
gamma 1;
value uniform 0;
}

frontAndBack
{
type empty;
}
}

// ************************************************** *********************** //