|
[Sponsors] |
August 27, 2013, 02:10 |
TEqn.H
|
#1 |
Senior Member
mohsen kh
Join Date: Jan 2013
Location: Iran
Posts: 125
Rep Power: 14 |
Hi dear Foamers
I do not know how to add an energy equation to my solver (porousSimpleFoam).my flow is incompressible and I do not know how to write this equation in openfoam.something like this format: fvScalarMatrix TEqn ( fvm::ddt(T) +fvm::div(phi,T) -fvm::laplacian(alpha,T) ); TEqn.solve(); I see programmer guide but I don't understand so much. rho(fluid)*Cp(fluid)[sigma dt/dt + Udt/dx]=k d2T/dx2 + q'" + (mu/K) u^2 Sigma = [porosity(rho*cp)f+(1-porosity)*(rhoc)s]/(rho*cp)f q"' = (1- porosity) q'"s k= (porosity*kf) + (1- porosity)*ks please help me if you know about this best regards mohsen |
|
September 2, 2013, 11:33 |
|
#2 | |
Member
Join Date: Apr 2013
Posts: 32
Rep Power: 12 |
Quote:
You can add a TE eqn file to code. But first simplify the your eqn. Also to make you understand code- fvm::ddt(T) +fvm::div(phi,T) -fvm::laplacian(alpha,T) this means dT/dt + UdT/dx]=k d2T/dx2 also since you are adding new variables like sigma, porosity etc...you need to first define them in the code. So, add TE eqn to code, define all new variables and include TE eqn it in main code file.... I think this will do..... |
||
September 3, 2013, 03:36 |
|
#3 | |
Senior Member
mohsen kh
Join Date: Jan 2013
Location: Iran
Posts: 125
Rep Power: 14 |
Quote:
I did it but it did not work ,would you please send me your contact information to send you my files |
||
September 3, 2013, 07:08 |
|
#4 | |
Member
Join Date: Apr 2013
Posts: 32
Rep Power: 12 |
Quote:
send it on che122791@chemical.iitd.ac.in.... regards, Raj |
||
September 3, 2013, 10:09 |
|
#5 | |
Senior Member
mohsen kh
Join Date: Jan 2013
Location: Iran
Posts: 125
Rep Power: 14 |
hi Raj
I sent it but it was not delivered please give me a general email,something like gmail or yahoo,... not an academic one. Thanks mohsen Quote:
|
||
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
uniform heating of fluid region | santoo_cfd | OpenFOAM Running, Solving & CFD | 15 | March 18, 2016 04:32 |
Solidification in OpenFoam | luke.christ | OpenFOAM | 24 | September 10, 2013 08:50 |
Differences simpleFoam vs. pimpleFoam / RASModel.H vs turbulenceModel.H | uli | OpenFOAM Programming & Development | 7 | January 26, 2013 16:01 |
simpleFoam with energy equation | sega | OpenFOAM Programming & Development | 6 | January 26, 2013 07:42 |