CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Pre-Processing

boundary contition type - mirror

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 12, 2013, 06:27
Default boundary contition type - mirror
  #1
New Member
 
klemen
Join Date: Aug 2012
Location: Slovenia
Posts: 26
Rep Power: 13
fogl is on a distinguished road
Is there a BC that would act as a mirror between two patches - what goes in at one patch goes out at the other and vice versa?

Regards
Klemen
fogl is offline   Reply With Quote

Old   November 15, 2013, 10:21
Default
  #2
Senior Member
 
Nima Samkhaniani
Join Date: Sep 2009
Location: Tehran, Iran
Posts: 1,266
Blog Entries: 1
Rep Power: 24
nimasam is on a distinguished road
Are you looking for cyclic BC ?
__________________
My Personal Website (http://nimasamkhaniani.ir/)
Telegram channel (https://t.me/cfd_foam)
nimasam is offline   Reply With Quote

Old   November 18, 2013, 07:54
Default
  #3
Member
 
Join Date: Nov 2012
Posts: 62
Rep Power: 13
Naruto is on a distinguished road
I think you can also use "symmetryPlane" for your purpose
__________________
Happy Foaming
Naruto is offline   Reply With Quote

Old   November 21, 2013, 09:37
Default
  #4
Member
 
phil
Join Date: Oct 2013
Posts: 36
Rep Power: 12
gelbebanane is on a distinguished road
Perhaps you should have a look at the "mapped" boundary condition. I try to set up a case with such an BC but with no effort till now.
gelbebanane is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
boundary conditions for simpleFoam calculation foam_noob OpenFOAM Running, Solving & CFD 8 July 1, 2015 09:07
Error during initialization of "rhoSimpleFoam" kornickel OpenFOAM Running, Solving & CFD 8 September 17, 2013 06:37
Need help with boundary conditions: open to atmosphere Wolle OpenFOAM 2 April 11, 2011 08:32
Boundary condition setting for non-premixed combustion using reactingFoam skyopener OpenFOAM 0 May 23, 2010 23:55
Problem with compile the setParabolicInlet ivanyao OpenFOAM Running, Solving & CFD 6 September 5, 2008 21:50


All times are GMT -4. The time now is 04:19.