Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Pre-Processing

SRFSimple B.C

Mark Forums Read

Reply

Search this Thread

October 23, 2013, 03:58	SRFSimple B.C	#1
thousand New Member khalil Join Date: Jul 2012 Posts: 21 Rep Power: 15	Hello together I want simulate a axial pump by SRFSimple solver and now dont know that urel/0 what shuld be! bc is: inlet--velocity inlet pipe--wall ( fixed wall) outlet--pressure outlet impler--wall (should be rotating wall) suppose: v inlet=1 m/s (0,0,1) rotating axis (0,0,1) 3000rpm

Reply

Tags

axial pump, rotate, srfsimplefoam

« Previous Thread | Next Thread »

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Confusion between 'non-slip' and 'slip' B.C	jinwon park	Main CFD Forum	7	March 6, 2008 05:56
how to set such B.C. in Fluent?	Sherri	FLUENT	1	January 12, 2006 13:32
Urgent! Help on UDF to set B.C. of 3rd type	Ray Hong	FLUENT	0	December 28, 2005 20:35
How to set B.C. of the 2nd or 3rd type in UDS?	Ray Hong	FLUENT	0	December 28, 2005 07:03
Non-Reflecting B.C. in NSC2KE	Zou Chu	Main CFD Forum	2	May 27, 1999 22:26

All times are GMT -4. The time now is 02:12.