CFD Online Logo CFD Online URL
Home > Forums > OpenFOAM Pre-Processing

phantom region created outside blockmesh bounding box

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   May 15, 2014, 10:31
Default phantom region created outside blockmesh bounding box
Senior Member
Derek Mitchell
Join Date: Mar 2014
Location: UK, Reading
Posts: 144
Rep Power: 6
derekm is on a distinguished road
This is all an adaption of CHTmultiregionfoam. It follows the same generation of region processing using topset.

I am getting the the generation of a region (domain4) outside the blockmesh bounding box I can not see where it is coming from. The blockmesh is blue and the phantom region is white in phantom region picture.

The slice picture shows the regions the tiny box contains heater and heaterInner, the next region out is topAir then rightSolid then topAir again as its contigous through the small aperture in the bottom right or right solid. p, li { white-space: pre-wrap; }phantom region picturethe regions can be seen in the slice picture.

The mesh passes checkMesh.
The blockmesh file has a diagram of the mesh in the blockmeshdict file.

./Allrunmesh was used to generate the files.

forget it its now disappeared as i tried to clean up to pack it into a zip file...
Attached Images
File Type: jpg phantom region.jpg (49.5 KB, 8 views)
File Type: jpg slice.jpg (10.0 KB, 5 views)
derekm is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Multi region meshing & recovering the original patch names fluidpath OpenFOAM Native Meshers: snappyHexMesh and Others 4 May 19, 2013 19:13
Using starToFoam clo OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 33 September 26, 2012 04:04
StarToFoam error Kart OpenFOAM Meshing & Mesh Conversion 1 February 4, 2010 05:38
Trimmed cell and embedded refinement mesh conversion issues michele OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 2 July 15, 2005 04:15
Import gmsh msh to Foam adorean Open Source Meshers: Gmsh, Netgen, CGNS, ... 24 April 27, 2005 08:19

All times are GMT -4. The time now is 02:20.