|
[Sponsors] |
chtMultiRegionSimpleFoam constAnIso --> Anialpha |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
July 21, 2014, 05:19 |
chtMultiRegionSimpleFoam constAnIso --> Anialpha
|
#1 |
New Member
Join Date: Apr 2014
Posts: 1
Rep Power: 0 |
Hi guys,
I am using the chtMultiRegionSimpleFoam solver of OpenFOAM 2.3. In my case I have two solids (black and red) and one fluid (blue). The black solid part has anisotropic material properties for kappa. At first the case was running and I got none-real results. Then I fixed the following BUG (commit: 512931dba2200781f726c9cd7c68f4458fcf31fe). Now I have some problems with this case. I get an error and a "request for volSymmTensorField Anialpha from objectRegistry", if I change "kappa solidThermo" to "kappa directionalSolidThermo". 1.) How have I to treat the interface between solid-solid and solid-fluid? 2.) What is Anialpha? 3.) Does Anialpha replace kappa? Till now I am using the following conditions for the interfaces: solid-solid type compressible::turbulentTemperatureCoupledBaffleMix ed;solid-fluid type compressible::turbulentTemperatureCoupledBaffleMix ed;Did someone run a similar case before and can help me? |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
STL -> GMSH -> OpenFOAM | eric.m.tridas | OpenFOAM | 7 | September 7, 2011 12:06 |
1.7.x -> buoyantPimpleFoam -> hRhoThermo -> incompressible and icoPoly3ThermoPhysics? | will.logie | OpenFOAM Programming & Development | 1 | February 16, 2011 20:52 |
1.7.x -> buoyantPimpleFoam -> hRhoThermo -> incompressible and icoPoly3ThermoPhysics? | will.logie | OpenFOAM | 0 | December 16, 2010 07:08 |
CAD -> gMsh -> enGrid -> OpenFOAM Problem | AlGates | OpenFOAM | 7 | August 6, 2010 12:46 |
Cyclic Boundaries -> Match Option -> Arbitrary | Derek | Siemens | 1 | August 4, 2004 22:06 |