 |
 |
 |
|
|
|
[Sponsors] | ||||
temperature boundary condition for extended surfaces (fins) |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
September 13, 2014, 10:18
|
temperature boundary condition for extended surfaces (fins)
|
#1 |
|
New Member
Pedram Pakad
Join Date: Jul 2013
Posts: 5
Rep Power: 12  |
hi everyone;
i want to simulate external flow over a cylinder with extended surfaces (fins). my solver is icofoam that contain energy equation. the temperature of cylinder is fixed. which boundary condition is suitable for the temperature of fins?!? |
|
|
|
|
|
September 16, 2014, 15:48
|
|
#2 |
|
Senior Member
Alex
Join Date: Oct 2013
Posts: 337
Rep Power: 21 |
Hello Pedram,
maybe you could try compressible::turbulentTemperatureCoupledBaffleMix ed, even though I am not sure if I understood well your case. Could you post your geometry or some sketch of it? Regards, Alex
__________________
Web site where I present my Master's Thesis: foamingtime.wordpress.com The case I talk about in this site was solved with chtMultiRegionSimpleFoam solver and involves radiation. Some basic tutorials are also resolved step by step in the web. If you are interested in these matters, you are invited to come in! 
|
|
|
|
|
|
|
| Tags |
| energy equation, fin, temperature bc |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [openSmoke] libOpenSMOKE | Tobi | OpenFOAM Community Contributions | 562 | January 25, 2023 09:21 |
| Domain Imbalance | HMR | CFX | 5 | October 10, 2016 05:57 |
| Boundary Condition for granular temperature Theta | cheng1988sjtu | OpenFOAM Programming & Development | 4 | July 4, 2016 16:08 |
| How to apply the temperature boundary condition on the outside of the mould? | alefem | FLOW-3D | 5 | May 25, 2010 05:32 |
| boundary condition : temperature | J.D.Yoon | FLUENT | 1 | August 29, 2000 04:08 |
Linear Mode
