CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   OpenFOAM Pre-Processing (https://www.cfd-online.com/Forums/openfoam-pre-processing/)
-   -   Trying to create an angular inlet condition (https://www.cfd-online.com/Forums/openfoam-pre-processing/162138-trying-create-angular-inlet-condition.html)

Michael.Mueller November 4, 2015 07:51
Trying to create an angular inlet condition
 
Hello users,

I need a inlet velocity patchfield!!

Is there any inlet patchfield for an angular inlet flow!!

Can somebody please help me? Can somebody create a new patchfield for angular inlet conditions?

Thank you very much!

Greeting

Michael Müller

wyldckat November 8, 2015 05:41
Quick answer: Sorry, but you have not provided enough information to help you :(
Please follow the guidelines listed here: http://www.cfd-online.com/Forums/ope...-get-help.html

Because the simplest answer is that you don't need to worry much about it and you can simply define the inlet vector. For example:
Code:
value uniform (1.5 2.45 1.3);


All times are GMT -4. The time now is 07:15.