CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Pre-Processing

Simulation results as Start conditions for a second one

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 20, 2016, 05:37
Default Simulation results as Start conditions for a second one
  #1
New Member
 
Louay
Join Date: Mar 2016
Posts: 5
Rep Power: 10
louay-tud is on a distinguished road
Hi Guys,
i really need your Help
Is it possible in openFOAM to perform a simulation and then use its results as initial conditions for a second one?

For example:

the first simulation(solved with interFoam) is tank, that has two holes filled up with water. The water is defined as a box inside the Tank in setfieldsDict. This Water should flow from the two holes and met up with the first geometry.

can i use the deformed water, that leaves that first geomtry in a second Simulation, in which that water meets another Geometry?

i know i can do the both simulations at one step, it would be easier, but i must to split the two geomtries and do this way
Thanks in advance
louay-tud is offline   Reply With Quote

Old   October 12, 2017, 10:55
Default
  #2
New Member
 
Luca
Join Date: Nov 2016
Posts: 21
Rep Power: 9
streamline90 is on a distinguished road
Hi Louay,

I've got the same problem, did you find a solution for it?

Luca
streamline90 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Can not start simulation using previous results Bruno Machado Fluent UDF and Scheme Programming 3 December 14, 2015 12:16
Wrong flow in ratating domain problem Sanyo CFX 17 August 15, 2015 07:20
Possible Bug in pimpleFoam (or createPatch) (or fluent3DMeshToFoam) cfdonline2mohsen OpenFOAM 3 October 21, 2013 10:28
Backup results in steady simulation Li CFX 0 July 9, 2007 06:39
simulation results for k-w model and SST model Li CFX 7 June 29, 2007 05:19


All times are GMT -4. The time now is 08:21.