CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Pre-Processing

Boundary condition pairs to avoid?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   September 27, 2016, 05:38
Default Boundary condition pairs to avoid?
  #1
Member
 
annn
Join Date: Jun 2016
Posts: 40
Rep Power: 2
cleoo is on a distinguished road
What are some boundary condition pairings that should be avoided and why?
or if you know of a document or a suggestion of where I could figure something like this out that would be great!

For example, fixing the pressure and velocity at the inlet and outlet should be avoided as this overdefines the situation.
cleoo is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Centrifugal fan j0hnny CFX 12 January 7, 2016 03:44
sliding mesh problem in CFX Saima CFX 45 September 22, 2015 10:53
Accessing multiple boundary patches from a custom boundary condition file ripudaman OpenFOAM Programming & Development 0 October 22, 2014 18:34
Error finding variable "THERMX" sunilpatil CFX 8 April 26, 2013 07:00
CFX fails to calculate a diffuser pipe flow shenying0710 CFX 7 March 26, 2013 05:13


All times are GMT -4. The time now is 00:47.