CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > OpenFOAM Pre-Processing

mappedPatch

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 28, 2017, 11:37
Default mappedPatch
  #1
Member
 
Arnout
Join Date: Nov 2010
Posts: 36
Rep Power: 8
The King is on a distinguished road
Hi,

I try to use a a cut through my domain as inlet condition. I'm using a mappedPatch type of inlet. My geometry is a simpel pipe with a 90o bend. I would like to map the outlet of my domain to my inlet, so it has a offset and it is 90 degrees rotated. I tried to use "offsetMode normal" but there I only can give a distance and not a vector as offset. Someone know how to do this?

K
The King is offline   Reply With Quote

Old   May 1, 2017, 04:40
Default
  #2
New Member
 
Jujjavarapu Vighnesh
Join Date: Apr 2017
Posts: 9
Rep Power: 2
vighnesh.j is on a distinguished road
I had to do a simple pipe with dimension that of micrometers.

I was always getting error.
So I switched to salome for meshing.it is solved
vighnesh.j is offline   Reply With Quote

Old   May 1, 2017, 05:59
Default
  #3
Member
 
Arnout
Join Date: Nov 2010
Posts: 36
Rep Power: 8
The King is on a distinguished road
Thank for you're response. My problem is that I need to use a sampling plane which is not parallel to the inlet plane. Seems impossible without writing code myself.


Sent from my iPhone using CFD Online Forum mobile app
The King is offline   Reply With Quote

Old   May 1, 2017, 21:14
Default
  #4
New Member
 
Jujjavarapu Vighnesh
Join Date: Apr 2017
Posts: 9
Rep Power: 2
vighnesh.j is on a distinguished road
Are you trying to do a 90degree bend pipe
vighnesh.j is offline   Reply With Quote

Old   May 4, 2017, 00:57
Default
  #5
Member
 
Arnout
Join Date: Nov 2010
Posts: 36
Rep Power: 8
The King is on a distinguished road
Yes. Thats what I'm doing.


Sent from my iPhone using CFD Online Forum mobile app
The King is offline   Reply With Quote

Old   July 22, 2017, 11:29
Default
  #6
New Member
 
Jujjavarapu Vighnesh
Join Date: Apr 2017
Posts: 9
Rep Power: 2
vighnesh.j is on a distinguished road
I guess it can be done in Salome
vighnesh.j is offline   Reply With Quote

Old   August 28, 2017, 10:03
Default
  #7
New Member
 
Jujjavarapu Vighnesh
Join Date: Apr 2017
Posts: 9
Rep Power: 2
vighnesh.j is on a distinguished road
Hello sir , i am doing a project in which the geometry of the pipe is 90 degree bent pipe.i used salome to create the geometry and mesh it but was unable ti set the number of meshes.i hope that you have done it in openfoam using blockmesh.Can you please help me on how you did it ?
vighnesh.j is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem of mappedPatch type ldxfx OpenFOAM Pre-Processing 1 May 28, 2015 03:56
Cyclic (mappedPatch) with LTSInterFoam in a closed channel Phil_ OpenFOAM Running, Solving & CFD 0 April 13, 2015 09:19
mappedPatch for two fluid regions Vesposo OpenFOAM Running, Solving & CFD 0 July 22, 2014 09:18
mappedPatch with channel flow ArathoN OpenFOAM Running, Solving & CFD 57 June 16, 2014 04:23
mappedPatch and weird profiles Danubi OpenFOAM Running, Solving & CFD 0 April 27, 2014 07:46


All times are GMT -4. The time now is 11:17.