CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Pre-Processing

boundary conditions for contact regions

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 22, 2018, 08:19
Default boundary conditions for contact regions
  #1
New Member
 
attanikalbanglav
Join Date: May 2018
Posts: 1
Rep Power: 0
attanikal is on a distinguished road
Hi all

I imported a 3D geometry of a reactor with impellers from fluent into OpenFOAM and wanted to use k-epsilon model. I found patches named contact_region-src and contact_region-trg on the constant/polymesh/boundary directory.

What boundary conditions shall i give for these contact_region-src & trg for k and epsilon.
attanikal is offline   Reply With Quote

Old   October 29, 2020, 22:44
Default
  #2
Member
 
Farzad Faraji
Join Date: Nov 2019
Posts: 84
Rep Power: 3
farzadmech is on a distinguished road
Hello attanikalbanglav
Did you find any answer for your question?


thanks,
Farzad
farzadmech is offline   Reply With Quote

Old   November 27, 2020, 02:36
Default
  #3
Senior Member
 
kandelabr's Avatar
 
Nejc
Join Date: Feb 2017
Location: Slovenia
Posts: 167
Rep Power: 6
kandelabr is on a distinguished road
it's called AMI in openFoam. search the forums for createPatch.
__________________
www.damogranlabs.com

Last edited by kandelabr; December 1, 2020 at 16:48. Reason: typo
kandelabr is offline   Reply With Quote

Old   December 1, 2020, 15:01
Default
  #4
New Member
 
Tamas's Avatar
 
Tamas Egeresi
Join Date: Nov 2014
Location: Budapest, Hungary
Posts: 14
Rep Power: 8
Tamas is on a distinguished road
Hi,



You shall use createPatch to connect the surfaces to each others. There you can define AMI-type boundary condition.
__________________
Tamas Egeresi
Senior Hydraulics Engineer

CFD Egeresi
www.cfdegeresi.freecluster.eu
Tamas is offline   Reply With Quote

Reply

Tags
contact_region-src

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Basic Nozzle-Expander Design karmavatar CFX 20 March 20, 2016 09:44
Problem in setting Boundary Condition Madhatter92 CFX 12 January 12, 2016 05:39
Low torque values on Screw Turbine Shaun Waters CFX 34 July 23, 2015 09:16
Waterwheel shaped turbine inside a pipe simulation problem mshahed91 CFX 3 January 10, 2015 12:19
Low Mixing time Problem Mavier CFX 5 April 29, 2013 01:00


All times are GMT -4. The time now is 00:59.