Couldn't get 2 regions while using sliding MRF
 

Dear all,


I have been modifying the sliding_MRF_meshes case file of wolfDynamics to fit my case. During the process, I could not get 2 regions. Also, when I check it through


splitMeshRegions -detectOnly | tee log.splitMeshRegions_2

I got only single region named cell_inner_volume. :confused: I could not get any AMI1 and AMI2 patch weights on checking through
moveDynamicMesh -checkAMI -noFunctionObjects

Both the case file and reference file has been shared through the link

https://drive.google.com/drive/folde...5C?usp=sharing

The simulation gif of sliding_MRF_meshes:

Sliding grids – Unsteady solver

• http://www.wolfdynamics.com/training...es/image13.gif

MRF – Steady solver

• http://www.wolfdynamics.com/training...es/image14.gif

What could be the possible error in my case setup? If you could help it would be great. Please feel free to ask if you have any doubts. Thank you for your time and consideration.


Sincerely,
Milan