CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Pre-Processing

openFOAM increasing PipeSurface temperature a function of length boundary condition

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 24, 2019, 13:13
Default openFOAM increasing PipeSurface temperature a function of length boundary condition
  #1
New Member
 
County Londonderry
Join Date: Nov 2019
Posts: 4
Rep Power: 3
photon_ed is on a distinguished road
hello I hope you can help me
I need to set up openFOAM boundary condition for a pipe surface with increasing temperature as a function of axial pipe length(increasing temperature with increasing axial length), this will be form buoyancyPimpleFoam if it makes any difference.
Please advise, many thanks!

regards
photon_ed is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Basic Nozzle-Expander Design karmavatar CFX 20 March 20, 2016 09:44
Temperature Jump boundary condition in openFOAM hoseinhd OpenFOAM Programming & Development 3 January 19, 2016 05:04
Problem in setting Boundary Condition Madhatter92 CFX 12 January 12, 2016 05:39
Question about heat transfer coefficient setting for CFX Anna Tian CFX 1 June 16, 2013 07:28
Water subcooled boiling Attesz CFX 7 January 5, 2013 04:32


All times are GMT -4. The time now is 06:09.