[mkjmalik]

Hi Foamers!!

when i run in parallel my simulation stops here .. is there any error??

Create time

Create mesh for time = 0


PIMPLE: Operating solver in PISO mode

Reading field p_rgh

Reading field U

Reading/calculating face flux field phi

Reading transportProperties

Selecting incompressible transport model Newtonian
Selecting incompressible transport model Newtonian
Selecting turbulence model type RAS
Selecting RAS turbulence model kEpsilon
RAS
{
RASModel kEpsilon;
turbulence on;
printCoeffs on;
Cmu 0.09;
C1 1.44;
C2 1.92;
C3 0;
sigmak 1;
sigmaEps 1.3;
}


Reading g

Reading hRef
Calculating field g.h

No MRF models present

No finite volume options present

GAMGPCG: Solving for pcorr, Initial residual = 1, Final residual = 2.13656e-006, No Iterations 9
time step continuity errors : sum local = 3.04079e-008, global = 1.32675e-010, cumulative = 1.32675e-010
Courant Number mean: 0.173611 max: 7.78233

Starting time loop

Courant Number mean: 0.0108507 max: 0.486396
Interface Courant Number mean: 0 max: 0
deltaT = 0.0625
Time = 0.0625

PIMPLE: iteration 1

[HPE]

Please refer below.