CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   OpenFOAM Pre-Processing (https://www.cfd-online.com/Forums/openfoam-pre-processing/)
-   -   line plot (https://www.cfd-online.com/Forums/openfoam-pre-processing/228080-line-plot.html)

Typ June 18, 2020 19:59

line plot
 
Hello,

do you know where this error come from:

Code:

--> FOAM Warning :
    From function void Foam::particle::locate(const vector&, const vector*, Foam::label, bool, const Foam::string&)
    in file particle/particle.C at line 483
    Particle initialised with a location outside of the mesh when tracking from centre (-2.91666667 0.025 0.0208333333) of cell 0 to position (-2.91 0.025 0)
--> FOAM Warning :
    From function void Foam::particle::locate(const vector&, const vector*, Foam::label, bool, const Foam::string&)
    in file particle/particle.C at line 483
    Particle initialised with a location outside of the mesh when tracking from centre (-1.91666667 0.025 0.0208333333) of cell 6 to position (-1.91 0.025 0)
--> FOAM Warning :
    From function void Foam::particle::locate(const vector&, const vector*, Foam::label, bool, const Foam::string&)
    in file particle/particle.C at line 483
    Particle initialised with a location outside of the mesh when tracking from centre (-1.04166667 0.0125 0.0104166667) of cell 463 to position (-1.04 0.0125 0)
Reading set description:
    wire1
    wire2
    wire3
    wire4
    wire5

and how i can avoid it? Besides does this influence my results in measuring?


All times are GMT -4. The time now is 03:03.