CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Pre-Processing

Boundary Pullout of fluid domain

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 22, 2020, 17:37
Default Boundary Pullout of fluid domain
  #1
Member
 
Join Date: Jul 2019
Posts: 77
Rep Power: 3
Bodo1993 is on a distinguished road
Dear All,
I am looking for studying the movement of a solid wall out of a flow domain. I am wondering if there is any way to implement this in OpenFOAM without dynamic meshing. Unfortunately, I use twoLiquidMixingFoam multiphase solver that does not have the dynamic mesh feature. I had several attempts to incorporate it, but I was not lucky enough!
I would appreciate your assistance either to find a way around dynamic meshing or to add this feature to the solver.
Thanks.
Bodo1993 is offline   Reply With Quote

Old   July 1, 2020, 19:58
Default
  #2
Member
 
Join Date: Jul 2019
Posts: 77
Rep Power: 3
Bodo1993 is on a distinguished road
Dear all,
I would greatly appreciate any assistance. Thanks.
Bodo1993 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Radiation in semi-transparent media with surface-to-surface model? mpeppels CFX 11 August 22, 2019 07:30
Wrong multiphase flow at rotating interface Sanyo CFX 14 February 7, 2017 17:19
Velocity vector in impeller passage ngoc_tran_bao CFX 24 May 3, 2016 21:16
Floating point exception: Zero divide liladhar CFX 11 December 16, 2013 04:07
domain imbalance for enrgy equation happy CFX 14 September 6, 2012 01:54


All times are GMT -4. The time now is 13:38.