Boundary Pullout of fluid domain

Bodo1993 · June 22, 2020, 17:37

Dear All,
I am looking for studying the movement of a solid wall out of a flow domain. I am wondering if there is any way to implement this in OpenFOAM without dynamic meshing. Unfortunately, I use twoLiquidMixingFoam multiphase solver that does not have the dynamic mesh feature. I had several attempts to incorporate it, but I was not lucky enough!
I would appreciate your assistance either to find a way around dynamic meshing or to add this feature to the solver.
Thanks.

Bodo1993 · July 1, 2020, 19:58

Dear all,
I would greatly appreciate any assistance. Thanks.

June 22, 2020, 17:37	Boundary Pullout of fluid domain	#1
Bodo1993 Senior Member Join Date: Jul 2019 Posts: 148 Rep Power: 6	Dear All, I am looking for studying the movement of a solid wall out of a flow domain. I am wondering if there is any way to implement this in OpenFOAM without dynamic meshing. Unfortunately, I use twoLiquidMixingFoam multiphase solver that does not have the dynamic mesh feature. I had several attempts to incorporate it, but I was not lucky enough! I would appreciate your assistance either to find a way around dynamic meshing or to add this feature to the solver. Thanks.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Radiation in semi-transparent media with surface-to-surface model?	mpeppels	CFX	11	August 22, 2019 07:30
Wrong multiphase flow at rotating interface	Sanyo	CFX	14	February 7, 2017 17:19
Velocity vector in impeller passage	ngoc_tran_bao	CFX	24	May 3, 2016 21:16
Floating point exception: Zero divide	liladhar	CFX	11	December 16, 2013 04:07
domain imbalance for enrgy equation	happy	CFX	14	September 6, 2012 01:54

July 1, 2020, 19:58		#2
Bodo1993 Senior Member Join Date: Jul 2019 Posts: 148 Rep Power: 6	Dear all, I would greatly appreciate any assistance. Thanks.