CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Pre-Processing

Problem with boundary/interface

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   July 11, 2020, 07:49
Default Problem with boundary/interface
New Member
andrea chianese
Join Date: May 2020
Posts: 1
Rep Power: 0
Joffy is on a distinguished road
hi guys
I'm new in OF and i have a problem so I'll try to explain it and get back a solution.
I have 3 different closed geometry (Duct-Filter-Airbox). I tried to mesh them with snappyHexMesh and, for the first time, the mesher didn't create the boundary for the interface but only 2 faceZone (duct_to_filter , filter_to_airbox). I hoped that, as inolther cases, it would have created the boundaries.

After that I would know why it didn't create the interface and if I want to create them manually, how should i do them? Because I saw the createBafflesDict but i don't know how it works.

thanks for helping me
Joffy is offline   Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
SU2-7.0.1 on ubuntu 18.04 hyunko SU2 Installation 7 March 16, 2020 04:37
UDF compiling problem Wouter Fluent UDF and Scheme Programming 6 June 6, 2012 04:43
Gambit - meshing over airfoil wrapping (?) problem JFDC FLUENT 1 July 11, 2011 05:59
natural convection problem for a CHT problem Se-Hee CFX 2 June 10, 2007 06:29
Adiabatic and Rotating wall (Convection problem) ParodDav CFX 5 April 29, 2007 19:13

All times are GMT -4. The time now is 19:26.