See Results of mapped Fields

SimonStar · August 17, 2020, 05:47

Hello,

I am using mapFields to interpolate fields from one mesh to another mesh for the first time now.
I got it without any errors in the terminal by using the following command:

Code:

mapFields -sourceTime 'latestTime' ../3_case_SFE -mapMethod cellPointInterpolate

But now by opening the case I can not see the results in paraview.
Just the normal geometry is visible and I only can choose 'solid color' but no fields.

In my case Folder is no File called U...
I do not really understand whats wrong - can someone help me?

Thank you
Simon

SimonStar · August 18, 2020, 02:45

Here for everyone who has the same problem and does not know mapField so good:

MapFields needs to have the empty Field Files in the destination folder. Because its only interpolating the empty files there.

August 17, 2020, 05:47	See Results of mapped Fields	#1
SimonStar Member Simon Join Date: Sep 2019 Location: Germany Posts: 51 Rep Power: 8	Hello, I am using mapFields to interpolate fields from one mesh to another mesh for the first time now. I got it without any errors in the terminal by using the following command: Code: mapFields -sourceTime 'latestTime' ../3_case_SFE -mapMethod cellPointInterpolate But now by opening the case I can not see the results in paraview. Just the normal geometry is visible and I only can choose 'solid color' but no fields. In my case Folder is no File called U... I do not really understand whats wrong - can someone help me? Thank you Simon Last edited by SimonStar; August 17, 2020 at 10:29.

August 18, 2020, 02:45		#2
SimonStar Member Simon Join Date: Sep 2019 Location: Germany Posts: 51 Rep Power: 8	Here for everyone who has the same problem and does not know mapField so good: MapFields needs to have the empty Field Files in the destination folder. Because its only interpolating the empty files there. Last edited by SimonStar; August 18, 2020 at 09:06.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mapped vs Cyclic Boundaries in OpenFOAM	arsenis	OpenFOAM Running, Solving & CFD	1	February 8, 2023 22:13
Error Interpolating Results onto New Mesh	nammeh	CFX	1	March 26, 2019 13:08
simpleFoam (RANS) - pitzDaily - mapped BC	gu1	OpenFOAM Running, Solving & CFD	4	February 3, 2019 17:32
Save Results automatically by APDL Command	ansyxyz	ANSYS	1	June 5, 2018 09:16
Transient Run - Output "Time" in partial results?	evcelica	CFX	2	May 16, 2012 22:36