CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Pre-Processing

Setting boundary conditions for front injection

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 14, 2020, 05:50
Default Setting boundary conditions for front injection
  #1
New Member
 
Saverio
Join Date: Oct 2020
Posts: 5
Rep Power: 3
Xavier_95 is on a distinguished road
Hi everyone.
I would like to replicate the conditions that we could find in a wind tunnel, in particular the one involving the front injection useful to manage correctly the boundary layer on the ground. I have already divided the lowerwall in two "walls" so that I can easily apply two different boundary conditions (before the injection and after the injection). Do you have any idea about the best setting? I thought to apply slip in the first part and then the wall functions but i am not sure that we are exactly modelling the case.
Xavier_95 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Table bounds warnings at: END OF TIME STEP CFXer CFX 4 July 17, 2020 00:44
UDF for Automatic Solution Initialization for previous case data file gartz89 Fluent UDF and Scheme Programming 6 March 30, 2020 08:38
Out File does not show Imbalance in % Mmaragann CFX 5 January 20, 2017 11:20
Velocity vector in impeller passage ngoc_tran_bao CFX 24 May 3, 2016 22:16
Water subcooled boiling Attesz CFX 7 January 5, 2013 04:32


All times are GMT -4. The time now is 21:47.