CFD Online Discussion Forums - OpenFoam - DynamicMesh SphericalAngularDamper value

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)

- OpenFOAM Pre-Processing (https://www.cfd-online.com/Forums/openfoam-pre-processing/)

- - OpenFoam - DynamicMesh SphericalAngularDamper value (https://www.cfd-online.com/Forums/openfoam-pre-processing/237972-openfoam-dynamicmesh-sphericalangulardamper-value.html)

OpenFoam - DynamicMesh SphericalAngularDamper value

Hi all,

At the moment I am modelling the efficiency for a hydraulic turbine in OpenFOAM. The generated theoretical power results from the product of angular velocity and torque around the turbine axis.

For this purpose I use the dynamic mesh solver sixDoFRigidBodyMotion. From a sensitivity analysis it follows that the sphericalAngularDamper restraint has a large influence on the modelled angular velocity and torque (see attachment).

This parameter has the unit [Nms/rad] and represents friction against angular motion. It acts in the opposite direction with respect to the angular motion.

The parameter is defined as follows:

Code:

restraints

{

    //- Some dumping functions

    translationDamper

    {

            //- Nms/rad

            //  Acts against motion as friction

            sixDoFRigidBodyMotionRestraint  sphericalAngularDamper;

            coeff 500;

    }

}

My question is: how do I estimate the value of the coefficient for the turbine? If I know from the manufacturer that the overall efficiëncy of this turbine is about 90%, can I transfer this efficiency into a coefficient for anuglar friction?

I hope to hear from you!

Best,
Bas

I discovered that there are multiple ways to find optimum operational conditions for a turbine in order to yield maximum production. The first is by running multiple simulations with a forced rotation for various rotational speeds (under a constant flow velocity). The second one is to apply a model with free rotation (and a fixed flow velocity) whilst varying the angular friction coefficient until one finds optimum conditions. Hence, the angular friction coefficient is not a term one knows on beforehand, but one must search for an optimum value that leads to maximum production of the turbine.